HB9FM-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9FM-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1765543955	13.95 Volt	620 Pkt	190 Pkt	79 Pcnt	73 Pcnt
1765543641	13.95 Volt	610 Pkt	180 Pkt	79 Pcnt	73 Pcnt
1765543341	13.95 Volt	590 Pkt	180 Pkt	79 Pcnt	73 Pcnt
1765543041	13.95 Volt	600 Pkt	180 Pkt	78 Pcnt	73 Pcnt
1765542741	13.95 Volt	600 Pkt	170 Pkt	77 Pcnt	73 Pcnt
1765542441	13.95 Volt	600 Pkt	170 Pkt	76 Pcnt	73 Pcnt
1765542141	13.95 Volt	610 Pkt	170 Pkt	75 Pcnt	73 Pcnt
1765541841	13.95 Volt	610 Pkt	170 Pkt	74 Pcnt	73 Pcnt
1765541541	13.95 Volt	600 Pkt	160 Pkt	74 Pcnt	73 Pcnt
1765541241	13.95 Volt	610 Pkt	160 Pkt	74 Pcnt	73 Pcnt
1765540941	13.95 Volt	590 Pkt	160 Pkt	74 Pcnt	73 Pcnt
1765540641	13.95 Volt	570 Pkt	160 Pkt	73 Pcnt	73 Pcnt
1765540341	13.95 Volt	570 Pkt	160 Pkt	74 Pcnt	73 Pcnt
1765540041	13.95 Volt	560 Pkt	160 Pkt	75 Pcnt	73 Pcnt
1765539741	13.95 Volt	550 Pkt	150 Pkt	75 Pcnt	73 Pcnt
1765539441	13.95 Volt	550 Pkt	160 Pkt	76 Pcnt	73 Pcnt
1765539141	13.95 Volt	530 Pkt	160 Pkt	77 Pcnt	73 Pcnt
1765538841	13.95 Volt	520 Pkt	150 Pkt	77 Pcnt	73 Pcnt
1765538541	13.95 Volt	510 Pkt	160 Pkt	79 Pcnt	73 Pcnt
1765538241	13.95 Volt	500 Pkt	150 Pkt	80 Pcnt	73 Pcnt
1765537941	13.95 Volt	490 Pkt	150 Pkt	79 Pcnt	73 Pcnt
1765537641	13.95 Volt	480 Pkt	150 Pkt	80 Pcnt	73 Pcnt
1765537341	13.95 Volt	470 Pkt	150 Pkt	78 Pcnt	73 Pcnt
1765537041	13.95 Volt	460 Pkt	150 Pkt	78 Pcnt	73 Pcnt
1765536741	13.95 Volt	470 Pkt	150 Pkt	78 Pcnt	73 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)