This is the latest recevied telemetry packets stored in our database for station/object OE3GJC-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Press*
Temp.in*
Hum*
QNH*
Temp.out*
1776629861
991.3 hPa
20.6 C deg
52.3 %
1014.6 hPa
0 C deg
1776628046
991 hPa
20.6 C deg
52.8 %
1014.3 hPa
0 C deg
1776624416
991 hPa
20.8 C deg
55 %
1014.2 hPa
0 C deg
1776620783
990.7 hPa
20.9 C deg
55.8 %
1013.9 hPa
0 C deg
1776618968
990.5 hPa
21 C deg
58.2 %
1013.8 hPa
0 C deg
1776617150
990.5 hPa
20.5 C deg
57.5 %
1013.8 hPa
0 C deg
1776615335
990.4 hPa
20.7 C deg
55.6 %
1013.7 hPa
0 C deg
1776613522
990.6 hPa
20.7 C deg
54.7 %
1013.9 hPa
0 C deg
1776609889
991.1 hPa
20.5 C deg
52.4 %
1014.4 hPa
0 C deg
1776608074
991.3 hPa
20.5 C deg
52.1 %
1014.6 hPa
0 C deg
1776606258
991.4 hPa
20.9 C deg
50.1 %
1014.7 hPa
0 C deg
1776604442
991.6 hPa
20.8 C deg
47.1 %
1014.9 hPa
0 C deg
1776600812
989.4 hPa
24.7 C deg
38.9 %
1012.3 hPa
0 C deg
1776598995
989.7 hPa
25 C deg
38.2 %
1012.6 hPa
0 C deg
1776595363
990.6 hPa
26 C deg
36.9 %
1013.5 hPa
0 C deg
1776593545
991.2 hPa
26.1 C deg
35.4 %
1014.1 hPa
0 C deg
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)