VA3CQC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA3CQC-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1776672322	0.68 Load	36 DegC	6337 Mb	3244 Pkt	247 Pkt
1776670522	0.34 Load	36 DegC	6313 Mb	3222 Pkt	234 Pkt
1776668722	0.04 Load	36 DegC	6313 Mb	3226 Pkt	243 Pkt
1776665122	0.01 Load	36 DegC	6313 Mb	3230 Pkt	246 Pkt
1776663322	0.35 Load	36 DegC	6313 Mb	3238 Pkt	253 Pkt
1776661522	0.41 Load	36 DegC	6313 Mb	3244 Pkt	248 Pkt
1776659722	0.08 Load	36 DegC	6313 Mb	3223 Pkt	241 Pkt
1776657923	0.03 Load	36 DegC	6313 Mb	3348 Pkt	242 Pkt
1776656123	0.11 Load	36 DegC	6314 Mb	3462 Pkt	240 Pkt
1776654323	0.02 Load	36 DegC	6317 Mb	3876 Pkt	240 Pkt
1776652523	0.05 Load	36 DegC	6317 Mb	5022 Pkt	242 Pkt
1776650723	0.07 Load	36 DegC	6321 Mb	5181 Pkt	239 Pkt
1776648923	0 Load	36 DegC	6321 Mb	5058 Pkt	251 Pkt
1776647123	0 Load	36 DegC	6330 Mb	4393 Pkt	223 Pkt
1776645323	0.31 Load	36 DegC	6331 Mb	4556 Pkt	275 Pkt
1776643523	0.33 Load	36 DegC	6310 Mb	4506 Pkt	284 Pkt
1776641722	0.13 Load	36 DegC	6313 Mb	4504 Pkt	293 Pkt
1776639922	0.36 Load	36 DegC	6314 Mb	4507 Pkt	303 Pkt
1776638122	0.02 Load	36 DegC	6314 Mb	4508 Pkt	281 Pkt
1776636322	0.13 Load	36 DegC	6314 Mb	4541 Pkt	314 Pkt
1776634522	0.04 Load	36 DegC	6314 Mb	4597 Pkt	350 Pkt
1776632722	0.02 Load	36 DegC	6314 Mb	3514 Pkt	359 Pkt
1776630922	0.51 Load	36 DegC	6319 Mb	3491 Pkt	343 Pkt
1776629123	0.01 Load	36 DegC	6323 Mb	3459 Pkt	329 Pkt
1776627323	0.09 Load	36 DegC	6323 Mb	3462 Pkt	353 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)