KB3AWQ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KB3AWQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	TEMP*
1761539031	13.73 Volt	520 Pkt	80 Pcnt	54.5 F
1761538731	13.73 Volt	510 Pkt	79 Pcnt	54.5 F
1761538431	13.73 Volt	520 Pkt	78 Pcnt	54.5 F
1761538135	13.73 Volt	510 Pkt	78 Pcnt	54.5 F
1761538131	13.73 Volt	510 Pkt	78 Pcnt	54.5 F
1761537831	13.73 Volt	530 Pkt	78 Pcnt	54.5 F
1761537531	13.73 Volt	540 Pkt	79 Pcnt	54.5 F
1761537231	13.73 Volt	560 Pkt	80 Pcnt	55.4 F
1761536931	13.73 Volt	550 Pkt	80 Pcnt	54.5 F
1761536631	13.73 Volt	550 Pkt	80 Pcnt	54.5 F
1761536339	13.73 Volt	550 Pkt	81 Pcnt	55.4 F
1761536031	13.73 Volt	560 Pkt	80 Pcnt	55.4 F
1761535731	13.73 Volt	570 Pkt	80 Pcnt	55.4 F
1761535431	13.73 Volt	580 Pkt	80 Pcnt	55.4 F
1761535131	13.73 Volt	590 Pkt	81 Pcnt	55.4 F
1761534831	13.73 Volt	610 Pkt	81 Pcnt	55.4 F
1761534533	13.73 Volt	590 Pkt	81 Pcnt	55.4 F
1761534531	13.73 Volt	590 Pkt	81 Pcnt	55.4 F
1761534231	13.73 Volt	590 Pkt	81 Pcnt	55.4 F
1761533931	13.73 Volt	570 Pkt	81 Pcnt	55.4 F
1761533631	13.73 Volt	570 Pkt	81 Pcnt	55.4 F
1761533331	13.73 Volt	580 Pkt	80 Pcnt	55.4 F
1761533031	13.73 Volt	570 Pkt	81 Pcnt	55.4 F
1761532731	13.73 Volt	560 Pkt	82 Pcnt	55.4 F
1761532431	13.73 Volt	550 Pkt	82 Pcnt	55.4 F

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

TEMP: 0, 0.9, -83.2

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)