IQ3PN-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ3PN-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Volt*
1761628110	87 Pkt	540 Pkt	0.11 Pcnt	13.11 Volt
1761627810	77 Pkt	530 Pkt	0.11 Pcnt	13.11 Volt
1761627510	91 Pkt	530 Pkt	0.11 Pcnt	13.11 Volt
1761627210	96 Pkt	520 Pkt	0.11 Pcnt	13.11 Volt
1761626910	97 Pkt	500 Pkt	0.11 Pcnt	13.11 Volt
1761626610	87 Pkt	480 Pkt	0.11 Pcnt	13.11 Volt
1761626310	70 Pkt	460 Pkt	0.11 Pcnt	13.11 Volt
1761626010	72 Pkt	460 Pkt	0.11 Pcnt	13.11 Volt
1761625710	83 Pkt	450 Pkt	0.11 Pcnt	13.11 Volt
1761625410	85 Pkt	430 Pkt	0.11 Pcnt	13.11 Volt
1761625110	76 Pkt	410 Pkt	0.11 Pcnt	13.11 Volt
1761624810	72 Pkt	390 Pkt	0.11 Pcnt	13.11 Volt
1761624510	69 Pkt	370 Pkt	0.11 Pcnt	13.11 Volt
1761624210	72 Pkt	360 Pkt	0.11 Pcnt	13.11 Volt
1761623910	62 Pkt	330 Pkt	0.11 Pcnt	13.11 Volt
1761623610	61 Pkt	320 Pkt	0.11 Pcnt	13.11 Volt
1761623310	66 Pkt	310 Pkt	0.11 Pcnt	13.11 Volt
1761623010	66 Pkt	290 Pkt	0.11 Pcnt	13.11 Volt
1761622710	56 Pkt	270 Pkt	0.11 Pcnt	13.11 Volt
1761622410	56 Pkt	270 Pkt	0.11 Pcnt	13.11 Volt
1761622110	43 Pkt	250 Pkt	0.11 Pcnt	13.11 Volt
1761621810	49 Pkt	240 Pkt	0.11 Pcnt	13.11 Volt
1761621510	44 Pkt	240 Pkt	0.11 Pcnt	13.11 Volt
1761621210	38 Pkt	250 Pkt	0.11 Pcnt	13.11 Volt
1761620910	40 Pkt	250 Pkt	0.11 Pcnt	13.11 Volt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Volt: 0, 0.079, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)