OK1JRA-16 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK1JRA-16. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkts*	RF->Inet*	DX_dist.*	live*	Temp_core*
1773301051	11 Pkts	11 Pkts	0 km	74 min.	53.33 C
1773300149	9 Pkts	9 Pkts	0 km	73 min.	53.33 C
1773299248	11 Pkts	11 Pkts	1 km	72 min.	53.33 C
1773298347	10 Pkts	9 Pkts	1 km	71 min.	53.33 C
1773297446	11 Pkts	11 Pkts	1 km	70 min.	53.33 C
1773296545	21 Pkts	20 Pkts	17 km	69 min.	53.33 C
1773295645	19 Pkts	16 Pkts	81 km	68 min.	53.33 C
1773294743	10 Pkts	10 Pkts	0 km	67 min.	31.67 C
1773293842	14 Pkts	13 Pkts	0 km	66 min.	53.33 C
1773292941	11 Pkts	10 Pkts	0 km	65 min.	26.11 C
1773292040	9 Pkts	9 Pkts	0 km	64 min.	53.33 C
1773291140	11 Pkts	11 Pkts	0 km	63 min.	53.33 C
1773290239	8 Pkts	8 Pkts	0 km	62 min.	53.33 C
1773289338	10 Pkts	10 Pkts	0 km	61 min.	53.33 C
1773288436	9 Pkts	9 Pkts	0 km	60 min.	53.33 C
1773287535	11 Pkts	11 Pkts	0 km	59 min.	53.33 C
1773286634	8 Pkts	8 Pkts	0 km	58 min.	53.33 C
1773285733	11 Pkts	11 Pkts	0 km	57 min.	53.33 C
1773284832	6 Pkts	6 Pkts	0 km	56 min.	53.33 C
1773283931	10 Pkts	10 Pkts	1 km	55 min.	53.33 C
1773283031	9 Pkts	9 Pkts	1 km	54 min.	53.33 C
1773282130	11 Pkts	11 Pkts	1 km	53 min.	53.33 C
1773281228	6 Pkts	6 Pkts	1 km	52 min.	53.33 C
1773280327	10 Pkts	10 Pkts	0 km	51 min.	53.33 C
1773279426	13 Pkts	13 Pkts	0 km	50 min.	53.33 C

*Used Equation Coefficients:

RxPkts: 0, 1, 0

RF->Inet: 0, 1, 0

DX_dist.: 0, 1, 0

live: 0, 1, 0

Temp_core: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)