TF1MT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TF1MT-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	EffTo*
1787596761	12.64 Volt	20 Pkt	95 Pcnt	97 Pcnt
1787595861	12.64 Volt	20 Pkt	96 Pcnt	97 Pcnt
1787594961	12.64 Volt	20 Pkt	100 Pcnt	97 Pcnt
1787594061	12.64 Volt	20 Pkt	100 Pcnt	97 Pcnt
1787593161	12.64 Volt	20 Pkt	92 Pcnt	97 Pcnt
1787592261	12.64 Volt	20 Pkt	92 Pcnt	97 Pcnt
1787591361	12.64 Volt	20 Pkt	92 Pcnt	97 Pcnt
1787590461	12.64 Volt	20 Pkt	92 Pcnt	97 Pcnt
1787589561	12.64 Volt	20 Pkt	100 Pcnt	97 Pcnt
1787588661	12.64 Volt	20 Pkt	100 Pcnt	97 Pcnt
1787587761	12.64 Volt	20 Pkt	100 Pcnt	97 Pcnt
1787586861	12.64 Volt	20 Pkt	100 Pcnt	97 Pcnt
1787585961	12.64 Volt	20 Pkt	100 Pcnt	97 Pcnt
1787585061	12.64 Volt	20 Pkt	100 Pcnt	97 Pcnt
1787584161	12.64 Volt	20 Pkt	96 Pcnt	97 Pcnt
1787583261	12.64 Volt	20 Pkt	95 Pcnt	97 Pcnt
1787582361	12.64 Volt	20 Pkt	95 Pcnt	97 Pcnt
1787581461	12.64 Volt	20 Pkt	95 Pcnt	97 Pcnt
1787580561	12.64 Volt	20 Pkt	100 Pcnt	97 Pcnt
1787579661	12.64 Volt	20 Pkt	100 Pcnt	97 Pcnt
1787578761	12.64 Volt	20 Pkt	100 Pcnt	97 Pcnt
1787577861	12.64 Volt	20 Pkt	100 Pcnt	97 Pcnt
1787576961	12.64 Volt	20 Pkt	100 Pcnt	97 Pcnt
1787576062	12.64 Volt	20 Pkt	100 Pcnt	97 Pcnt
1787575162	12.64 Volt	20 Pkt	96 Pcnt	97 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EffTo: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)