VK4RAR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RAR-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	BATT V*	Temp 1*	Temp 2*	Spam*	DcoEf*
1780786840	12.83 Volt	15.5 C	16 C	20 Pakts	59 Pakts
1780786540	13.8 Volt	15 C	16 C	33 Pakts	59 Pakts
1780786240	13.8 Volt	15 C	15.5 C	34 Pakts	59 Pakts
1780785940	13.65 Volt	14.5 C	15.5 C	24 Pakts	60 Pakts
1780785640	13.8 Volt	14.5 C	15 C	36 Pakts	60 Pakts
1780785340	13.8 Volt	14 C	15 C	31 Pakts	58 Pakts
1780785040	13.8 Volt	14 C	15 C	14 Pakts	57 Pakts
1780784740	13.88 Volt	14 C	15 C	15 Pakts	58 Pakts
1780784440	13.8 Volt	13.5 C	14.5 C	13 Pakts	60 Pakts
1780784140	13.88 Volt	13.5 C	14.5 C	30 Pakts	60 Pakts
1780783840	13.65 Volt	13 C	14.5 C	53 Pakts	60 Pakts
1780783540	13.8 Volt	13 C	14.5 C	43 Pakts	59 Pakts
1780783240	13.8 Volt	13 C	14.5 C	21 Pakts	58 Pakts
1780782940	13.8 Volt	13 C	14.5 C	22 Pakts	57 Pakts
1780782640	13.8 Volt	13 C	14.5 C	30 Pakts	58 Pakts
1780782340	13.8 Volt	12.5 C	14.5 C	31 Pakts	56 Pakts
1780782040	13.8 Volt	12.5 C	14.5 C	39 Pakts	57 Pakts
1780781740	13.8 Volt	12.5 C	14 C	49 Pakts	57 Pakts
1780781440	12.98 Volt	12.5 C	14 C	61 Pakts	57 Pakts
1780781140	13.8 Volt	12.5 C	14 C	43 Pakts	55 Pakts
1780780840	13.8 Volt	12.5 C	14 C	21 Pakts	53 Pakts
1780780540	13.8 Volt	12.5 C	14 C	20 Pakts	53 Pakts
1780780240	13.8 Volt	12 C	14 C	35 Pakts	55 Pakts
1780779940	13.8 Volt	12 C	14 C	38 Pakts	54 Pakts
1780779640	13.8 Volt	12 C	14 C	22 Pakts	54 Pakts

*Used Equation Coefficients:

BATT V: 0, 0.075, 0

Temp 1: 0, 0.5, -64

Temp 2: 0, 0.5, -64

Spam: 0, 1, 0

DcoEf: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)