VK5RWR-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK5RWR-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1780607110	12.93 Volt	120 Pkt	90 Pcnt	6.5 C
1780606210	13 Volt	130 Pkt	91 Pcnt	6.5 C
1780605310	13 Volt	140 Pkt	92 Pcnt	7 C
1780604410	13 Volt	140 Pkt	91 Pcnt	7 C
1780603510	13 Volt	140 Pkt	91 Pcnt	7 C
1780602610	13 Volt	120 Pkt	90 Pcnt	7 C
1780601710	13 Volt	110 Pkt	90 Pcnt	7.5 C
1780600810	13 Volt	120 Pkt	92 Pcnt	7.5 C
1780599911	13 Volt	130 Pkt	95 Pcnt	7.5 C
1780599010	13 Volt	130 Pkt	95 Pcnt	7 C
1780598111	13.08 Volt	120 Pkt	94 Pcnt	7.5 C
1780597211	13.08 Volt	110 Pkt	90 Pcnt	7.5 C
1780596311	13.08 Volt	110 Pkt	89 Pcnt	7.5 C
1780595411	13.08 Volt	110 Pkt	89 Pcnt	7.5 C
1780594511	13.08 Volt	100 Pkt	88 Pcnt	7.5 C
1780593611	13.08 Volt	100 Pkt	93 Pcnt	8 C
1780592711	13.08 Volt	100 Pkt	92 Pcnt	8 C
1780591811	13.08 Volt	110 Pkt	94 Pcnt	8 C
1780590911	13.08 Volt	100 Pkt	90 Pcnt	8 C
1780590011	13.08 Volt	110 Pkt	89 Pcnt	8 C
1780589111	13.08 Volt	100 Pkt	87 Pcnt	8 C
1780588211	13.08 Volt	100 Pkt	86 Pcnt	8.5 C
1780587311	13.08 Volt	100 Pkt	87 Pcnt	8.5 C
1780586411	13.08 Volt	100 Pkt	86 Pcnt	9 C
1780585511	13.08 Volt	90 Pkt	88 Pcnt	9 C

*Used Equation Coefficients:

Vin: 0, 0.073, 0.01

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)