N7UW-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N7UW-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1788680911	14.03 Volt	160 Pkt	30 Pkt	47 Pcnt
1788680312	14.03 Volt	170 Pkt	30 Pkt	46 Pcnt
1788679714	14.03 Volt	160 Pkt	30 Pkt	44 Pcnt
1788679115	14.03 Volt	180 Pkt	40 Pkt	48 Pcnt
1788678513	14.03 Volt	190 Pkt	40 Pkt	49 Pcnt
1788677915	14.03 Volt	190 Pkt	40 Pkt	50 Pcnt
1788677312	14.03 Volt	170 Pkt	30 Pkt	51 Pcnt
1788676712	14.03 Volt	170 Pkt	40 Pkt	56 Pcnt
1788676116	14.03 Volt	160 Pkt	30 Pkt	58 Pcnt
1788675512	14.03 Volt	150 Pkt	30 Pkt	61 Pcnt
1788674912	14.03 Volt	140 Pkt	20 Pkt	59 Pcnt
1788674312	14.03 Volt	140 Pkt	20 Pkt	61 Pcnt
1788673715	14.03 Volt	150 Pkt	20 Pkt	60 Pcnt
1788673112	14.03 Volt	140 Pkt	20 Pkt	57 Pcnt
1788672512	14.03 Volt	140 Pkt	20 Pkt	56 Pcnt
1788671912	14.03 Volt	140 Pkt	20 Pkt	54 Pcnt
1788671312	14.03 Volt	150 Pkt	20 Pkt	56 Pcnt
1788670712	14.03 Volt	150 Pkt	20 Pkt	61 Pcnt
1788670112	14.03 Volt	150 Pkt	20 Pkt	65 Pcnt
1788669512	14.03 Volt	160 Pkt	20 Pkt	68 Pcnt
1788668912	14.03 Volt	150 Pkt	20 Pkt	75 Pcnt
1788668312	14.03 Volt	150 Pkt	20 Pkt	79 Pcnt
1788667712	14.03 Volt	140 Pkt	20 Pkt	85 Pcnt
1788667112	14.03 Volt	140 Pkt	20 Pkt	84 Pcnt
1788666512	14.03 Volt	140 Pkt	20 Pkt	82 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)