YM5KST-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM5KST-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1761951328	12 Pkt	13 Pkt	-69 dBm	10.91 V
1761950598	11 Pkt	22 Pkt	-69 dBm	10.89 V
1761949867	11 Pkt	13 Pkt	-69 dBm	10.87 V
1761949138	18 Pkt	19 Pkt	-69 dBm	10.87 V
1761948408	12 Pkt	3 Pkt	-70 dBm	10.85 V
1761947677	11 Pkt	2 Pkt	-70 dBm	10.87 V
1761946947	9 Pkt	7 Pkt	-70 dBm	10.87 V
1761944757	8 Pkt	4 Pkt	-69 dBm	10.85 V
1761944027	3 Pkt	0 Pkt	-69 dBm	10.89 V
1761943297	11 Pkt	0 Pkt	-71 dBm	10.87 V
1761942567	0 Pkt	0 Pkt	-69 dBm	10.87 V
1761941837	7 Pkt	13 Pkt	-69 dBm	10.91 V
1761941107	15 Pkt	7 Pkt	-69 dBm	10.87 V
1761940377	9 Pkt	16 Pkt	-69 dBm	10.89 V
1761939647	1 Pkt	11 Pkt	-69 dBm	10.89 V
1761938917	12 Pkt	9 Pkt	-71 dBm	10.91 V
1761937457	11 Pkt	6 Pkt	-69 dBm	10.87 V
1761936727	6 Pkt	1 Pkt	-69 dBm	10.85 V
1761935997	6 Pkt	0 Pkt	-69 dBm	10.89 V
1761935267	6 Pkt	0 Pkt	-69 dBm	10.87 V
1761934537	2 Pkt	0 Pkt	-70 dBm	10.87 V
1761933807	6 Pkt	0 Pkt	-71 dBm	10.85 V
1761933077	9 Pkt	0 Pkt	-69 dBm	10.87 V
1761932347	10 Pkt	0 Pkt	-69 dBm	10.85 V
1761931617	1 Pkt	0 Pkt	-69 dBm	10.85 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)