ED4YAG-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED4YAG-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Dg1h*	Eff*	Rx10m*	Dg10m*
1784674466	250 Pkt	120 Pkt	82 Pcnt	55 Pkt	25 Pkt
1784673265	230 Pkt	110 Pkt	82 Pcnt	54 Pkt	26 Pkt
1784672064	210 Pkt	100 Pkt	82 Pcnt	39 Pkt	22 Pkt
1784670862	210 Pkt	100 Pkt	82 Pcnt	42 Pkt	21 Pkt
1784669661	230 Pkt	100 Pkt	82 Pcnt	42 Pkt	20 Pkt
1784668460	240 Pkt	100 Pkt	82 Pcnt	36 Pkt	16 Pkt
1784667259	230 Pkt	90 Pkt	82 Pcnt	51 Pkt	21 Pkt
1784666058	230 Pkt	90 Pkt	82 Pcnt	43 Pkt	19 Pkt
1784664857	240 Pkt	100 Pkt	82 Pcnt	39 Pkt	17 Pkt
1784663658	250 Pkt	100 Pkt	82 Pcnt	49 Pkt	20 Pkt
1784662457	250 Pkt	100 Pkt	82 Pcnt	58 Pkt	23 Pkt
1784661253	270 Pkt	110 Pkt	82 Pcnt	39 Pkt	17 Pkt
1784660052	270 Pkt	110 Pkt	82 Pcnt	47 Pkt	20 Pkt
1784658851	250 Pkt	100 Pkt	82 Pcnt	55 Pkt	29 Pkt
1784657650	200 Pkt	70 Pkt	82 Pcnt	49 Pkt	17 Pkt
1784656449	190 Pkt	70 Pkt	82 Pcnt	34 Pkt	14 Pkt
1784654047	220 Pkt	70 Pkt	82 Pcnt	37 Pkt	14 Pkt
1784650443	190 Pkt	50 Pkt	82 Pcnt	35 Pkt	10 Pkt
1784649242	180 Pkt	60 Pkt	82 Pcnt	47 Pkt	17 Pkt
1784648041	170 Pkt	60 Pkt	82 Pcnt	26 Pkt	11 Pkt
1784646840	190 Pkt	70 Pkt	82 Pcnt	26 Pkt	10 Pkt
1784645638	220 Pkt	90 Pkt	82 Pcnt	41 Pkt	15 Pkt
1784644439	210 Pkt	90 Pkt	82 Pcnt	38 Pkt	16 Pkt
1784643237	190 Pkt	70 Pkt	82 Pcnt	42 Pkt	17 Pkt
1784642036	160 Pkt	60 Pkt	82 Pcnt	43 Pkt	16 Pkt

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff: 0, 1, 0

Rx10m: 0, 1, 0

Dg10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)