SN8KR-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SN8KR-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	A2*	A3*	A4*	A5*
1761493707	14.48 Volt	0 None	0 None	0 None	0 None
1761492529	14.55 Volt	0 None	0 None	0 None	0 None
1761482948	14.48 Volt	0 None	0 None	0 None	0 None
1761482589	14.48 Volt	0 None	0 None	0 None	0 None
1761478334	14.48 Volt	0 None	0 None	0 None	0 None
1761475041	14.48 Volt	0 None	0 None	0 None	0 None
1761474323	-	-	-	-	-
1761473601	14.48 Volt	0 None	0 None	0 None	0 None
1761473239	14.93 Volt	0 None	0 None	0 None	0 None
1761455460	14.55 Volt	0 None	0 None	0 None	0 None
1761403122	14.55 Volt	0 None	0 None	0 None	0 None
1761399894	14.48 Volt	0 None	0 None	0 None	0 None
1761399534	14.48 Volt	0 None	0 None	0 None	0 None
1761399173	14.48 Volt	0 None	0 None	0 None	0 None
1761398813	14.48 Volt	0 None	0 None	0 None	0 None
1761398453	14.48 Volt	0 None	0 None	0 None	0 None
1761398092	14.48 Volt	0 None	0 None	0 None	0 None
1761397732	14.48 Volt	0 None	0 None	0 None	0 None
1761395210	14.4 Volt	0 None	0 None	0 None	0 None
1761392126	14.48 Volt	0 None	0 None	0 None	0 None
1761386080	14.4 Volt	0 None	0 None	0 None	0 None
1761383918	14.4 Volt	0 None	0 None	0 None	0 None
1761383558	14.4 Volt	0 None	0 None	0 None	0 None
1761383197	14.4 Volt	0 None	0 None	0 None	0 None
1761382477	14.4 Volt	0 None	0 None	0 None	0 None

*Used Equation Coefficients:

Vin: 0, 0.075, 0

A2: 0, 0, 0

A3: 0, 0, 0

A4: 0, 0, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)