SV3GCB-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SV3GCB-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	DgS*	Eff*
1780612681	17.5 C	13.95 Volt	0 Pkt	19.98 Pcnt	97 Pcnt
1780609081	18 C	13.95 Volt	0 Pkt	19.99 Pcnt	97 Pcnt
1780605481	18.5 C	14.03 Volt	10 Pkt	19.99 Pcnt	97 Pcnt
1780601881	19 C	13.95 Volt	30 Pkt	20 Pcnt	97 Pcnt
1780598282	20.5 C	13.95 Volt	40 Pkt	20 Pcnt	97 Pcnt
1780594682	21.5 C	13.95 Volt	40 Pkt	19.99 Pcnt	97 Pcnt
1780591082	24.5 C	13.95 Volt	50 Pkt	19.98 Pcnt	97 Pcnt
1780587482	27.5 C	13.95 Volt	50 Pkt	19.97 Pcnt	97 Pcnt
1780583882	30.5 C	13.95 Volt	40 Pkt	19.97 Pcnt	97 Pcnt
1780580282	32 C	13.95 Volt	50 Pkt	19.99 Pcnt	97 Pcnt
1780576682	31.5 C	13.95 Volt	40 Pkt	19.99 Pcnt	97 Pcnt
1780573082	29 C	13.95 Volt	40 Pkt	20.01 Pcnt	97 Pcnt
1780569487	26 C	13.95 Volt	40 Pkt	20.02 Pcnt	97 Pcnt
1780565883	26.5 C	14.03 Volt	40 Pkt	20.03 Pcnt	97 Pcnt
1780562283	26.5 C	13.95 Volt	40 Pkt	20.04 Pcnt	97 Pcnt
1780558683	25 C	13.95 Volt	70 Pkt	20.05 Pcnt	97 Pcnt
1780555083	24 C	13.95 Volt	50 Pkt	20.05 Pcnt	97 Pcnt
1780551483	21 C	13.95 Volt	100 Pkt	20.08 Pcnt	97 Pcnt
1780547883	20 C	13.95 Volt	50 Pkt	20.08 Pcnt	97 Pcnt
1780544284	17 C	13.95 Volt	30 Pkt	20.08 Pcnt	97 Pcnt
1780540684	17 C	13.95 Volt	0 Pkt	20.08 Pcnt	97 Pcnt
1780537084	18 C	13.95 Volt	10 Pkt	20.09 Pcnt	97 Pcnt
1780533484	19 C	13.95 Volt	0 Pkt	20.1 Pcnt	97 Pcnt
1780529884	19.5 C	13.95 Volt	0 Pkt	20.1 Pcnt	97 Pcnt
1780526284	19.5 C	13.95 Volt	10 Pkt	20.11 Pcnt	97 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

DgS: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)