IR1ZXE-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR1ZXE-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1789965509	13.04 Volt	520 Pkt	130 Pkt	72 Pcnt
1789965209	13.04 Volt	500 Pkt	130 Pkt	72 Pcnt
1789964909	13.04 Volt	480 Pkt	140 Pkt	71 Pcnt
1789964609	13.04 Volt	470 Pkt	140 Pkt	71 Pcnt
1789964309	13.04 Volt	470 Pkt	140 Pkt	71 Pcnt
1789964009	13.04 Volt	450 Pkt	150 Pkt	70 Pcnt
1789963709	13.04 Volt	440 Pkt	150 Pkt	70 Pcnt
1789963409	13.04 Volt	410 Pkt	150 Pkt	68 Pcnt
1789963109	13.04 Volt	410 Pkt	140 Pkt	68 Pcnt
1789962809	13.04 Volt	420 Pkt	140 Pkt	68 Pcnt
1789962509	13.04 Volt	410 Pkt	140 Pkt	67 Pcnt
1789962209	13.04 Volt	400 Pkt	140 Pkt	66 Pcnt
1789961909	13.04 Volt	400 Pkt	130 Pkt	66 Pcnt
1789961609	13.04 Volt	400 Pkt	130 Pkt	65 Pcnt
1789961321	13.04 Volt	400 Pkt	120 Pkt	64 Pcnt
1789961009	13.04 Volt	400 Pkt	110 Pkt	65 Pcnt
1789960709	13.04 Volt	400 Pkt	110 Pkt	66 Pcnt
1789960409	13.04 Volt	410 Pkt	110 Pkt	67 Pcnt
1789960109	13.04 Volt	400 Pkt	110 Pkt	67 Pcnt
1789959809	13.04 Volt	390 Pkt	100 Pkt	66 Pcnt
1789959509	13.04 Volt	390 Pkt	100 Pkt	67 Pcnt
1789959209	13.04 Volt	380 Pkt	110 Pkt	67 Pcnt
1789958909	13.04 Volt	380 Pkt	110 Pkt	67 Pcnt
1789958609	13.04 Volt	390 Pkt	110 Pkt	65 Pcnt
1789958309	13.04 Volt	390 Pkt	110 Pkt	65 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)