F4ASK-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F4ASK-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1780583272	13.05 Volt	60 Pkt	20 Pkt	86 Pcnt
1780582371	12.98 Volt	70 Pkt	20 Pkt	89 Pcnt
1780581470	13.05 Volt	60 Pkt	20 Pkt	85 Pcnt
1780579669	13.05 Volt	60 Pkt	20 Pkt	90 Pcnt
1780576065	13.05 Volt	50 Pkt	20 Pkt	98 Pcnt
1780573362	13.05 Volt	50 Pkt	20 Pkt	100 Pcnt
1780567056	13.05 Volt	90 Pkt	20 Pkt	98 Pcnt
1780566155	13.05 Volt	80 Pkt	20 Pkt	98 Pcnt
1780565254	12.98 Volt	90 Pkt	20 Pkt	97 Pcnt
1780564353	13.05 Volt	90 Pkt	20 Pkt	97 Pcnt
1780563453	13.05 Volt	100 Pkt	20 Pkt	95 Pcnt
1780562552	13.05 Volt	100 Pkt	20 Pkt	96 Pcnt
1780561652	13.05 Volt	100 Pkt	30 Pkt	95 Pcnt
1780560750	12.98 Volt	100 Pkt	30 Pkt	95 Pcnt
1780559850	13.05 Volt	100 Pkt	30 Pkt	97 Pcnt
1780558948	13.05 Volt	100 Pkt	30 Pkt	97 Pcnt
1780556247	13.05 Volt	40 Pkt	20 Pkt	100 Pcnt
1780555345	13.05 Volt	20 Pkt	10 Pkt	100 Pcnt
1780554504	13.05 Volt	10 Pkt	0 Pkt	100 Pcnt
1780551676	13.05 Volt	100 Pkt	20 Pkt	92 Pcnt
1780550775	13.05 Volt	90 Pkt	20 Pkt	91 Pcnt
1780547171	13.05 Volt	90 Pkt	20 Pkt	94 Pcnt
1780546270	13.05 Volt	90 Pkt	20 Pkt	97 Pcnt
1780545369	13.05 Volt	80 Pkt	20 Pkt	97 Pcnt
1780544469	13.05 Volt	80 Pkt	20 Pkt	97 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)