DB9XP-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB9XP-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1789939882	1007.4 hPa	24 C deg	47.1 %	471 -	0 C deg
1789938107	1007.3 hPa	24.1 C deg	47.1 %	480 -	0 C deg
1789936252	1007.3 hPa	24.1 C deg	47.6 %	490 -	0 C deg
1789934437	1007 hPa	24 C deg	47.6 %	498 -	0 C deg
1789932622	1006.5 hPa	24 C deg	47.5 %	497 -	0 C deg
1789930807	1006.2 hPa	24.1 C deg	48.3 %	490 -	0 C deg
1789928992	1005.4 hPa	23.9 C deg	47.5 %	500 -	0 C deg
1789927177	1004.8 hPa	24.3 C deg	47.9 %	475 -	0 C deg
1789925361	1004.3 hPa	24.4 C deg	48.3 %	464 -	0 C deg
1789923546	1003.8 hPa	24.5 C deg	49.3 %	459 -	0 C deg
1789921731	1003.2 hPa	24.4 C deg	49.4 %	472 -	0 C deg
1789919916	1003 hPa	24.2 C deg	47.5 %	507 -	0 C deg
1789918101	1002.8 hPa	24.4 C deg	47.9 %	501 -	0 C deg
1789916286	1002.2 hPa	24.7 C deg	47.9 %	471 -	0 C deg
1789914471	1001.6 hPa	24.7 C deg	47.3 %	499 -	0 C deg
1789912656	1001.7 hPa	24.6 C deg	46.5 %	542 -	0 C deg
1789910841	1001.7 hPa	24.7 C deg	45.9 %	569 -	0 C deg
1789909026	1001.5 hPa	24.9 C deg	45 %	595 -	0 C deg
1789907211	1001.4 hPa	25.1 C deg	45.5 %	631 -	0 C deg
1789905396	1001.5 hPa	25 C deg	44.1 %	640 -	0 C deg
1789903580	1001.6 hPa	24.8 C deg	43.2 %	591 -	0 C deg
1789901765	1001.8 hPa	24.6 C deg	43.5 %	609 -	0 C deg
1789899950	1001.7 hPa	24.4 C deg	42.3 %	622 -	0 C deg
1789898135	1001.8 hPa	24.3 C deg	42 %	649 -	0 C deg
1789896320	1001.9 hPa	24.2 C deg	41.8 %	632 -	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)