VK2BLS-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2BLS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Temp*
1784711528	11.95 Volts	16.12 Deg.C
1784710014	11.98 Volts	16.61 Deg.C
1784709115	11.98 Volts	16.61 Deg.C
1784708808	12.01 Volts	16.61 Deg.C
1784707908	11.98 Volts	17.1 Deg.C
1784707602	12.01 Volts	16.61 Deg.C
1784706392	12.01 Volts	17.1 Deg.C
1784705493	12.01 Volts	17.59 Deg.C
1784704593	12.04 Volts	18.07 Deg.C
1784703693	12.07 Volts	18.56 Deg.C
1784702794	12.1 Volts	19.05 Deg.C
1784701894	13.45 Volts	20.52 Deg.C
1784701889	13.51 Volts	20.52 Deg.C
1784701844	13.54 Volts	20.52 Deg.C
1784701818	13.51 Volts	20.03 Deg.C
1784701801	13.57 Volts	20.03 Deg.C
1784701676	13.65 Volts	20.03 Deg.C
1784701519	13.77 Volts	19.54 Deg.C
1784701498	13.74 Volts	19.54 Deg.C
1784701430	13.83 Volts	19.05 Deg.C
1784701424	13.8 Volts	19.05 Deg.C
1784701410	13.86 Volts	18.56 Deg.C
1784700511	11.98 Volts	19.05 Deg.C
1784700201	11.98 Volts	19.54 Deg.C
1784699301	11.98 Volts	20.03 Deg.C

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.489, -283.15

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)