DB0SLF Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0SLF. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1765592573	13.05 Volt	620 Pkt	200 Pkt	81 Pcnt	7.5 C
1765592572	13.05 Volt	620 Pkt	200 Pkt	81 Pcnt	7.5 C
1765591973	13.05 Volt	630 Pkt	190 Pkt	81 Pcnt	7.5 C
1765591972	13.05 Volt	630 Pkt	190 Pkt	81 Pcnt	7.5 C
1765591374	12.9 Volt	630 Pkt	190 Pkt	80 Pcnt	7.5 C
1765591372	12.9 Volt	630 Pkt	190 Pkt	80 Pcnt	7.5 C
1765590773	13.05 Volt	640 Pkt	190 Pkt	79 Pcnt	7.5 C
1765590772	13.05 Volt	640 Pkt	190 Pkt	79 Pcnt	7.5 C
1765590173	13.05 Volt	650 Pkt	200 Pkt	78 Pcnt	8 C
1765590172	13.05 Volt	650 Pkt	200 Pkt	78 Pcnt	8 C
1765589573	13.05 Volt	660 Pkt	200 Pkt	75 Pcnt	8 C
1765589572	13.05 Volt	660 Pkt	200 Pkt	75 Pcnt	8 C
1765588973	13.05 Volt	680 Pkt	200 Pkt	74 Pcnt	8 C
1765588972	13.05 Volt	680 Pkt	200 Pkt	74 Pcnt	8 C
1765588372	12.98 Volt	710 Pkt	200 Pkt	74 Pcnt	8 C
1765588372	12.98 Volt	710 Pkt	200 Pkt	74 Pcnt	8 C
1765587796	13.05 Volt	700 Pkt	200 Pkt	74 Pcnt	8 C
1765587796	13.05 Volt	700 Pkt	200 Pkt	74 Pcnt	8 C
1765587173	13.05 Volt	710 Pkt	210 Pkt	73 Pcnt	8 C
1765587172	13.05 Volt	710 Pkt	210 Pkt	73 Pcnt	8 C
1765586573	13.05 Volt	710 Pkt	210 Pkt	72 Pcnt	8 C
1765586572	13.05 Volt	710 Pkt	210 Pkt	72 Pcnt	8 C
1765585976	13.05 Volt	700 Pkt	200 Pkt	72 Pcnt	8 C
1765585972	13.05 Volt	700 Pkt	200 Pkt	72 Pcnt	8 C
1765585373	13.05 Volt	700 Pkt	200 Pkt	71 Pcnt	8 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)