LZ0PTN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ0PTN. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	EffTo*	Eff1h*
1753774025	13.88 Volt	110 Pkt	53 Pcnt	47 Pcnt
1753772826	13.88 Volt	110 Pkt	53 Pcnt	50 Pcnt
1753772225	13.88 Volt	110 Pkt	53 Pcnt	47 Pcnt
1753771626	13.88 Volt	110 Pkt	53 Pcnt	45 Pcnt
1753771026	13.88 Volt	100 Pkt	53 Pcnt	43 Pcnt
1753770426	13.88 Volt	100 Pkt	53 Pcnt	42 Pcnt
1753769826	13.88 Volt	90 Pkt	53 Pcnt	39 Pcnt
1753769226	13.88 Volt	90 Pkt	53 Pcnt	40 Pcnt
1753768626	13.88 Volt	100 Pkt	53 Pcnt	43 Pcnt
1753768026	13.88 Volt	110 Pkt	53 Pcnt	44 Pcnt
1753767426	13.88 Volt	110 Pkt	53 Pcnt	46 Pcnt
1753766826	13.88 Volt	130 Pkt	53 Pcnt	50 Pcnt
1753766226	13.88 Volt	140 Pkt	53 Pcnt	53 Pcnt
1753765626	13.88 Volt	130 Pkt	53 Pcnt	50 Pcnt
1753765026	13.88 Volt	130 Pkt	53 Pcnt	51 Pcnt
1753764426	13.88 Volt	130 Pkt	53 Pcnt	51 Pcnt
1753763826	13.88 Volt	130 Pkt	53 Pcnt	50 Pcnt
1753763226	13.88 Volt	120 Pkt	53 Pcnt	48 Pcnt
1753762626	13.88 Volt	120 Pkt	53 Pcnt	47 Pcnt
1753762026	13.88 Volt	120 Pkt	53 Pcnt	49 Pcnt
1753761426	13.88 Volt	120 Pkt	53 Pcnt	49 Pcnt
1753760826	13.88 Volt	120 Pkt	53 Pcnt	50 Pcnt
1753760226	13.88 Volt	110 Pkt	53 Pcnt	49 Pcnt
1753759626	13.88 Volt	120 Pkt	53 Pcnt	50 Pcnt
1753759026	13.88 Volt	110 Pkt	53 Pcnt	48 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

EffTo: 0, 1, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)