OE6XAR-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE6XAR-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1753300005	12.23 Volt	110 Pkt	50 Pkt	23 Pcnt
1753300004	12.23 Volt	110 Pkt	50 Pkt	23 Pcnt
1753299704	12.23 Volt	120 Pkt	50 Pkt	23 Pcnt
1753299426	12.23 Volt	130 Pkt	60 Pkt	25 Pcnt
1753299404	12.23 Volt	130 Pkt	60 Pkt	25 Pcnt
1753299104	12.23 Volt	130 Pkt	60 Pkt	24 Pcnt
1753298805	12.23 Volt	140 Pkt	60 Pkt	25 Pcnt
1753298804	12.23 Volt	140 Pkt	60 Pkt	25 Pcnt
1753298504	12.23 Volt	150 Pkt	60 Pkt	26 Pcnt
1753298205	12.23 Volt	140 Pkt	60 Pkt	25 Pcnt
1753298204	12.23 Volt	140 Pkt	60 Pkt	25 Pcnt
1753297904	12.23 Volt	140 Pkt	50 Pkt	24 Pcnt
1753297605	12.23 Volt	150 Pkt	60 Pkt	26 Pcnt
1753297604	12.23 Volt	150 Pkt	60 Pkt	26 Pcnt
1753297005	12.23 Volt	140 Pkt	60 Pkt	26 Pcnt
1753297004	12.23 Volt	140 Pkt	60 Pkt	26 Pcnt
1753296713	12.23 Volt	140 Pkt	60 Pkt	26 Pcnt
1753296406	12.23 Volt	140 Pkt	60 Pkt	26 Pcnt
1753296404	12.23 Volt	140 Pkt	60 Pkt	26 Pcnt
1753296104	12.23 Volt	140 Pkt	60 Pkt	26 Pcnt
1753295805	12.23 Volt	140 Pkt	60 Pkt	26 Pcnt
1753295804	12.23 Volt	140 Pkt	60 Pkt	26 Pcnt
1753295504	12.23 Volt	140 Pkt	60 Pkt	27 Pcnt
1753295205	12.23 Volt	140 Pkt	60 Pkt	27 Pcnt
1753295204	12.23 Volt	140 Pkt	60 Pkt	27 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)