IR2DE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2DE. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	DgR*	Eff1h*
1765580751	1 Pkt	5.11 Pcnt	13 Pcnt
1765580451	0 Pkt	5.11 Pcnt	11 Pcnt
1765580151	1 Pkt	5.11 Pcnt	11 Pcnt
1765579851	2 Pkt	5.11 Pcnt	15 Pcnt
1765579551	1 Pkt	5.11 Pcnt	15 Pcnt
1765579251	0 Pkt	5.11 Pcnt	14 Pcnt
1765578951	0 Pkt	5.11 Pcnt	12 Pcnt
1765578651	1 Pkt	5.11 Pcnt	14 Pcnt
1765578351	1 Pkt	5.11 Pcnt	16 Pcnt
1765578051	0 Pkt	5.11 Pcnt	13 Pcnt
1765577751	0 Pkt	5.11 Pcnt	16 Pcnt
1765577451	0 Pkt	5.11 Pcnt	15 Pcnt
1765577151	0 Pkt	5.11 Pcnt	16 Pcnt
1765576851	1 Pkt	5.11 Pcnt	16 Pcnt
1765576551	1 Pkt	5.11 Pcnt	14 Pcnt
1765576251	1 Pkt	5.11 Pcnt	10 Pcnt
1765575954	0 Pkt	5.11 Pcnt	11 Pcnt
1765575651	0 Pkt	5.11 Pcnt	13 Pcnt
1765575351	1 Pkt	5.11 Pcnt	13 Pcnt
1765575051	1 Pkt	5.11 Pcnt	15 Pcnt
1765574751	1 Pkt	5.11 Pcnt	11 Pcnt
1765574451	1 Pkt	5.11 Pcnt	10 Pcnt
1765574151	0 Pkt	5.11 Pcnt	13 Pcnt
1765573851	0 Pkt	5.11 Pcnt	12 Pcnt
1765573551	0 Pkt	5.11 Pcnt	13 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)