9A4OS-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A4OS-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1753624187	14.1 Volt	340 Pkt	80 Pkt	77 Pcnt
1753623012	14.1 Volt	350 Pkt	80 Pkt	77 Pcnt
1753621782	14.1 Volt	360 Pkt	90 Pkt	77 Pcnt
1753619383	14.1 Volt	320 Pkt	80 Pkt	82 Pcnt
1753618179	14.1 Volt	290 Pkt	80 Pkt	83 Pcnt
1753616978	14.1 Volt	270 Pkt	70 Pkt	82 Pcnt
1753615777	14.1 Volt	280 Pkt	80 Pkt	80 Pcnt
1753614575	14.1 Volt	270 Pkt	70 Pkt	79 Pcnt
1753613375	14.1 Volt	260 Pkt	70 Pkt	76 Pcnt
1753612174	14.1 Volt	240 Pkt	70 Pkt	74 Pcnt
1753610972	14.1 Volt	300 Pkt	90 Pkt	77 Pcnt
1753609772	14.1 Volt	340 Pkt	110 Pkt	79 Pcnt
1753608571	14.1 Volt	350 Pkt	120 Pkt	81 Pcnt
1753607370	14.1 Volt	300 Pkt	90 Pkt	80 Pcnt
1753606168	14.1 Volt	290 Pkt	70 Pkt	80 Pcnt
1753604967	14.1 Volt	300 Pkt	80 Pkt	82 Pcnt
1753603766	14.1 Volt	330 Pkt	90 Pkt	83 Pcnt
1753602565	14.1 Volt	330 Pkt	90 Pkt	84 Pcnt
1753601365	14.1 Volt	330 Pkt	100 Pkt	85 Pcnt
1753598961	14.1 Volt	330 Pkt	90 Pkt	81 Pcnt
1753597760	14.1 Volt	330 Pkt	100 Pkt	80 Pcnt
1753596560	14.1 Volt	340 Pkt	100 Pkt	81 Pcnt
1753595358	14.1 Volt	340 Pkt	100 Pkt	80 Pcnt
1753594159	14.1 Volt	340 Pkt	100 Pkt	78 Pcnt
1753592956	14.1 Volt	340 Pkt	90 Pkt	76 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)