AI6KG-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AI6KG-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	SoC*	V*	I*
1761547256	92.35 %	12.14 V	1.01 A
1761547241	90.25 %	12.14 V	0.81 A
1761547228	94.67 %	12.37 V	1.1 A
1761547212	81.44 %	12.38 V	0.92 A
1761547196	85.11 %	12.46 V	1.09 A
1761547182	87.76 %	12.02 V	1.13 A
1761547166	91.01 %	12.21 V	1 A
1761547151	83.23 %	11.92 V	1.06 A
1761547136	84.55 %	12.16 V	0.86 A
1761547121	87.55 %	12.19 V	0.9 A
1761547106	91.34 %	12.15 V	0.94 A
1761547091	85.17 %	11.91 V	0.82 A
1761547076	93.59 %	12.15 V	0.92 A
1761547062	91.12 %	11.97 V	0.9 A
1761547046	86.7 %	12.16 V	1.06 A
1761547033	84.98 %	12.48 V	1.11 A
1761547016	91.86 %	12.04 V	0.82 A
1761547001	85.24 %	11.94 V	1.16 A
1761546986	83.97 %	12.41 V	0.98 A
1761546971	83.24 %	12.14 V	0.99 A
1761546957	85.11 %	12.08 V	0.8 A
1761546941	85.57 %	12.04 V	1.18 A
1761546926	82.96 %	12.44 V	1.18 A
1761546911	89.69 %	12.35 V	1.2 A
1761546896	93.53 %	12.06 V	1.08 A

*Used Equation Coefficients:

SoC: 0, 1, 0

V: 0, 1, 0

I: 0, 1, 0

NA: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)