VA2HMC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA2HMC-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Tin*	Effall*	Rx1h*
1765549597	13.88 Volt	7.5 °C	65 Pcnt	2.5 Pcnt
1765549298	13.88 Volt	7.5 °C	65 Pcnt	2.57 Pcnt
1765549297	13.88 Volt	7.5 °C	65 Pcnt	2.57 Pcnt
1765548997	13.88 Volt	7.5 °C	65 Pcnt	2.31 Pcnt
1765548697	13.88 Volt	7.5 °C	65 Pcnt	2.61 Pcnt
1765548397	13.88 Volt	7.5 °C	65 Pcnt	2.62 Pcnt
1765548097	13.88 Volt	7.5 °C	65 Pcnt	2.6 Pcnt
1765547797	13.88 Volt	7.5 °C	65 Pcnt	2.51 Pcnt
1765547497	13.88 Volt	7.5 °C	65 Pcnt	2.2 Pcnt
1765547197	13.88 Volt	7.5 °C	65 Pcnt	2.13 Pcnt
1765546897	13.88 Volt	7.5 °C	65 Pcnt	2.2 Pcnt
1765546598	13.88 Volt	7.5 °C	65 Pcnt	2.17 Pcnt
1765546597	13.88 Volt	7.5 °C	65 Pcnt	2.17 Pcnt
1765546297	13.88 Volt	7.5 °C	65 Pcnt	2.12 Pcnt
1765545997	13.88 Volt	7.5 °C	65 Pcnt	2.41 Pcnt
1765545697	13.88 Volt	7.5 °C	65 Pcnt	2.4 Pcnt
1765545397	13.88 Volt	7.5 °C	65 Pcnt	2.42 Pcnt
1765545097	13.88 Volt	7.5 °C	65 Pcnt	2.22 Pcnt
1765544797	13.88 Volt	7.5 °C	65 Pcnt	2.25 Pcnt
1765544497	13.88 Volt	7 °C	65 Pcnt	2.39 Pcnt
1765544197	13.88 Volt	7.5 °C	65 Pcnt	2.46 Pcnt
1765543597	13.88 Volt	7 °C	65 Pcnt	2.88 Pcnt
1765543299	13.88 Volt	7.5 °C	65 Pcnt	3.03 Pcnt
1765542997	13.88 Volt	7.5 °C	65 Pcnt	3.03 Pcnt
1765542697	13.88 Volt	7 °C	65 Pcnt	2.87 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Tin: 0, 0.5, -64

Dg1h: 0, 10, 0

Effall: 0, 1, 0

Rx1h: 0, 0.001, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)