This is the latest recevied telemetry packets stored in our database for station/object E22UYE-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
PM1.0*
PM2.5*
PM10*
RSSI*
Voltage*
1755734402
10 ug/m3
338 ug/m3
345 ug/m3
-70 dBm
9.76 V
1755729697
7 ug/m3
330 ug/m3
330 ug/m3
-72 dBm
0.25 V
1755724622
7 ug/m3
329 ug/m3
329 ug/m3
-69 dBm
0.25 V
1755720186
7 ug/m3
330 ug/m3
330 ug/m3
-71 dBm
0.43 V
1755708376
10 ug/m3
330 ug/m3
341 ug/m3
-70 dBm
0.14 V
1755706528
8 ug/m3
332 ug/m3
338 ug/m3
-70 dBm
0.14 V
1755704680
10 ug/m3
338 ug/m3
340 ug/m3
-71 dBm
9.23 V
1755702858
8 ug/m3
337 ug/m3
343 ug/m3
-72 dBm
9.23 V
1755701035
9 ug/m3
336 ug/m3
349 ug/m3
-70 dBm
9.21 V
1755699214
9 ug/m3
338 ug/m3
343 ug/m3
-72 dBm
9.21 V
1755697392
10 ug/m3
336 ug/m3
342 ug/m3
-71 dBm
9.19 V
1755695570
11 ug/m3
337 ug/m3
343 ug/m3
-71 dBm
9.17 V
1755693791
10 ug/m3
335 ug/m3
342 ug/m3
-72 dBm
9.17 V
1755689617
8 ug/m3
334 ug/m3
340 ug/m3
-69 dBm
9.17 V
*Used Equation Coefficients:
PM1.0: 0, 1, 0
PM2.5: 0, 1, 0
PM10: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)