OE8XDR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE8XDR-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1757451745	13.5 Volt	380 Pkt	51 Pcnt	25.5 C
1757451744	13.5 Volt	380 Pkt	51 Pcnt	25.5 C
1757451444	13.5 Volt	380 Pkt	52 Pcnt	25.5 C
1757451144	13.5 Volt	380 Pkt	53 Pcnt	25.5 C
1757450844	13.5 Volt	380 Pkt	54 Pcnt	25.5 C
1757450544	13.5 Volt	380 Pkt	54 Pcnt	25.5 C
1757450244	13.5 Volt	380 Pkt	54 Pcnt	25.5 C
1757449944	13.5 Volt	370 Pkt	53 Pcnt	25 C
1757449644	13.5 Volt	360 Pkt	51 Pcnt	25 C
1757449344	13.5 Volt	370 Pkt	51 Pcnt	25 C
1757449044	13.5 Volt	370 Pkt	52 Pcnt	25 C
1757448744	13.5 Volt	360 Pkt	51 Pcnt	25 C
1757448444	13.5 Volt	360 Pkt	50 Pcnt	25 C
1757448144	13.5 Volt	360 Pkt	52 Pcnt	25 C
1757447844	13.5 Volt	360 Pkt	51 Pcnt	24.5 C
1757447544	13.5 Volt	360 Pkt	52 Pcnt	24.5 C
1757447244	13.5 Volt	350 Pkt	50 Pcnt	24.5 C
1757446944	13.5 Volt	350 Pkt	50 Pcnt	24.5 C
1757446644	13.5 Volt	350 Pkt	50 Pcnt	24.5 C
1757446345	13.5 Volt	350 Pkt	50 Pcnt	25 C
1757446344	13.5 Volt	350 Pkt	50 Pcnt	25 C
1757446044	13.5 Volt	360 Pkt	51 Pcnt	25 C
1757445744	13.5 Volt	350 Pkt	51 Pcnt	25 C
1757445444	13.5 Volt	350 Pkt	51 Pcnt	24.5 C
1757445144	13.5 Volt	360 Pkt	51 Pcnt	24.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)