Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object IW2HUZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time Rx10m* Rx1h* Dg10m* Dg1h* Eff1h*
1784688885 2 Pkt 10 Pkt 0 Pkt 0 Pkt 100 Pcnt
1784688585 1 Pkt 10 Pkt 0 Pkt 0 Pkt 92 Pcnt
1784688285 3 Pkt 10 Pkt 0 Pkt 0 Pkt 92 Pcnt
1784687985 2 Pkt 10 Pkt 0 Pkt 0 Pkt 92 Pcnt
1784687684 2 Pkt 10 Pkt 0 Pkt 0 Pkt 86 Pcnt
1784687384 3 Pkt 10 Pkt 0 Pkt 0 Pkt 81 Pcnt
1784687084 2 Pkt 10 Pkt 0 Pkt 0 Pkt 81 Pcnt
1784686783 2 Pkt 10 Pkt 0 Pkt 0 Pkt 81 Pcnt
1784686483 2 Pkt 10 Pkt 0 Pkt 0 Pkt 82 Pcnt
1784686183 1 Pkt 10 Pkt 0 Pkt 0 Pkt 77 Pcnt
1784685883 3 Pkt 10 Pkt 0 Pkt 0 Pkt 77 Pcnt
1784685582 4 Pkt 10 Pkt 0 Pkt 0 Pkt 77 Pcnt
1784685282 1 Pkt 10 Pkt 0 Pkt 0 Pkt 77 Pcnt
1784684982 1 Pkt 10 Pkt 0 Pkt 0 Pkt 82 Pcnt
1784684681 3 Pkt 10 Pkt 0 Pkt 0 Pkt 82 Pcnt
1784684381 2 Pkt 10 Pkt 0 Pkt 0 Pkt 83 Pcnt
1784684081 2 Pkt 10 Pkt 0 Pkt 0 Pkt 88 Pcnt
1784683781 3 Pkt 10 Pkt 0 Pkt 0 Pkt 93 Pcnt
1784683480 3 Pkt 10 Pkt 0 Pkt 0 Pkt 93 Pcnt
1784683180 3 Pkt 10 Pkt 0 Pkt 0 Pkt 93 Pcnt
1784682880 2 Pkt 10 Pkt 0 Pkt 0 Pkt 93 Pcnt
1784682579 1 Pkt 10 Pkt 0 Pkt 0 Pkt 93 Pcnt
1784682279 3 Pkt 10 Pkt 0 Pkt 0 Pkt 93 Pcnt
1784681979 4 Pkt 10 Pkt 0 Pkt 0 Pkt 94 Pcnt
1784681679 1 Pkt 10 Pkt 0 Pkt 0 Pkt 93 Pcnt
*Used Equation Coefficients:
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)