9A3DZK-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A3DZK-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Temp*	A3*	A4*	A5*
1753731440	12.08 Volt	0 °C	0 None	0 None	0 None
1753731140	12.08 Volt	0 °C	0 None	0 None	0 None
1753731040	12.08 Volt	0 °C	0 None	0 None	0 None
1753730540	12.08 Volt	0 °C	0 None	0 None	0 None
1753730240	12.08 Volt	0 °C	0 None	0 None	0 None
1753729940	12.08 Volt	0 °C	0 None	0 None	0 None
1753729640	13.8 Volt	0 °C	0 None	0 None	0 None
1753729040	11.63 Volt	0 °C	0 None	0 None	0 None
1753728741	11.7 Volt	0 °C	0 None	0 None	0 None
1753728140	13.8 Volt	0 °C	0 None	0 None	0 None
1753727839	13.8 Volt	0 °C	0 None	0 None	0 None
1753727541	13.8 Volt	0 °C	0 None	0 None	0 None
1753727242	13.8 Volt	0 °C	0 None	0 None	0 None
1753726946	13.8 Volt	0 °C	0 None	0 None	0 None
1753726639	13.73 Volt	0 °C	0 None	0 None	0 None
1753726339	13.8 Volt	0 °C	0 None	0 None	0 None
1753726039	13.8 Volt	0 °C	0 None	0 None	0 None
1753725739	13.8 Volt	0 °C	0 None	0 None	0 None
1753725461	13.73 Volt	0 °C	0 None	0 None	0 None
1753725140	13.73 Volt	0 °C	0 None	0 None	0 None
1753724842	13.73 Volt	0 °C	0 None	0 None	0 None
1753724239	13.73 Volt	0 °C	0 None	0 None	0 None
1753723940	13.8 Volt	0 °C	0 None	0 None	0 None
1753718643	12 Volt	0 °C	0 None	0 None	0 None
1753718343	12 Volt	0 °C	0 None	0 None	0 None

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Temp: 0, 0, 0

A3: 0, 0, 0

A4: 0, 0, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)