EB7RCS-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EB7RCS-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	EfTot*
1785341121	12.45 Volt	320 Pkt	150 Pkt	74 Pcnt	66 Pcnt
1785340821	12.45 Volt	320 Pkt	160 Pkt	75 Pcnt	66 Pcnt
1785340821	12.45 Volt	320 Pkt	160 Pkt	75 Pcnt	66 Pcnt
1785340521	12.45 Volt	320 Pkt	160 Pkt	76 Pcnt	66 Pcnt
1785340221	12.45 Volt	300 Pkt	150 Pkt	75 Pcnt	66 Pcnt
1785340221	12.45 Volt	300 Pkt	150 Pkt	75 Pcnt	66 Pcnt
1785339921	12.45 Volt	300 Pkt	150 Pkt	75 Pcnt	66 Pcnt
1785339622	12.45 Volt	310 Pkt	160 Pkt	79 Pcnt	66 Pcnt
1785339621	12.45 Volt	310 Pkt	160 Pkt	79 Pcnt	66 Pcnt
1785339321	12.45 Volt	320 Pkt	160 Pkt	81 Pcnt	66 Pcnt
1785339024	12.45 Volt	300 Pkt	150 Pkt	81 Pcnt	66 Pcnt
1785339021	12.45 Volt	300 Pkt	150 Pkt	81 Pcnt	66 Pcnt
1785338721	12.45 Volt	300 Pkt	150 Pkt	80 Pcnt	66 Pcnt
1785338421	12.45 Volt	300 Pkt	160 Pkt	81 Pcnt	66 Pcnt
1785338421	12.45 Volt	300 Pkt	160 Pkt	81 Pcnt	66 Pcnt
1785338121	12.45 Volt	310 Pkt	160 Pkt	81 Pcnt	66 Pcnt
1785337822	12.45 Volt	310 Pkt	160 Pkt	80 Pcnt	66 Pcnt
1785337821	12.45 Volt	310 Pkt	160 Pkt	80 Pcnt	66 Pcnt
1785337521	12.45 Volt	300 Pkt	150 Pkt	75 Pcnt	66 Pcnt
1785337222	12.45 Volt	290 Pkt	150 Pkt	74 Pcnt	66 Pcnt
1785337221	12.45 Volt	290 Pkt	150 Pkt	74 Pcnt	66 Pcnt
1785336921	12.45 Volt	290 Pkt	160 Pkt	73 Pcnt	66 Pcnt
1785336621	12.45 Volt	300 Pkt	160 Pkt	72 Pcnt	66 Pcnt
1785336621	12.45 Volt	300 Pkt	160 Pkt	72 Pcnt	66 Pcnt
1785336321	12.45 Volt	290 Pkt	150 Pkt	71 Pcnt	66 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EfTot: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)