E20ZNR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E20ZNR-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*
1761516880	22 Pkt	0 Pkt	-74 dBm
1761515955	15 Pkt	0 Pkt	-75 dBm
1761515031	17 Pkt	0 Pkt	-77 dBm
1761514107	23 Pkt	1 Pkt	-76 dBm
1761513181	21 Pkt	0 Pkt	-76 dBm
1761512256	21 Pkt	0 Pkt	-76 dBm
1761511332	23 Pkt	0 Pkt	-77 dBm
1761510406	24 Pkt	0 Pkt	-73 dBm
1761508556	19 Pkt	1 Pkt	-76 dBm
1761507631	21 Pkt	0 Pkt	-74 dBm
1761506705	23 Pkt	0 Pkt	-77 dBm
1761505781	21 Pkt	1 Pkt	-76 dBm
1761504855	22 Pkt	0 Pkt	-75 dBm
1761503930	20 Pkt	0 Pkt	-73 dBm
1761503005	15 Pkt	0 Pkt	-74 dBm
1761502080	23 Pkt	1 Pkt	-76 dBm
1761499303	24 Pkt	1 Pkt	-77 dBm
1761498378	21 Pkt	0 Pkt	-76 dBm
1761497453	21 Pkt	0 Pkt	-76 dBm
1761496528	15 Pkt	0 Pkt	-76 dBm
1761495604	21 Pkt	0 Pkt	-74 dBm
1761494679	22 Pkt	0 Pkt	-74 dBm
1761492828	22 Pkt	0 Pkt	-75 dBm
1761491903	22 Pkt	0 Pkt	-73 dBm
1761490979	24 Pkt	2 Pkt	-77 dBm

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

SUN: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)