OK4AB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK4AB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Temperatu*	Humidity*	Pressure*	Satellite*
1777626629	25.07 C	45.76 %	988.7 hPa	8
1777626569	25.01 C	45.88 %	988.7 hPa	9
1777626449	24.85 C	46.15 %	988.7 hPa	8
1777626389	24.77 C	46.26 %	988.7 hPa	8
1777626329	24.69 C	46.65 %	988.7 hPa	9
1777626207	24.54 C	46.54 %	988.7 hPa	7
1777626148	24.48 C	46.63 %	988.7 hPa	9
1777626087	24.43 C	46.7 %	988.7 hPa	9
1777626027	24.39 C	46.71 %	988.7 hPa	9
1777625967	24.37 C	46.65 %	988.7 hPa	8
1777625908	24.34 C	46.74 %	988.7 hPa	9
1777625847	24.3 C	46.83 %	988.7 hPa	9
1777625788	24.28 C	46.9 %	988.7 hPa	8
1777625727	24.23 C	47 %	988.7 hPa	9
1777625667	24.2 C	47.05 %	988.7 hPa	7
1777625608	24.15 C	47.1 %	988.7 hPa	8
1777625548	24.12 C	47.28 %	988.7 hPa	8
1777625487	24.09 C	47.32 %	988.7 hPa	8
1777625365	24.01 C	47.49 %	988.7 hPa	10
1777625245	23.93 C	47.61 %	988.7 hPa	10
1777625185	23.88 C	47.65 %	988.7 hPa	10
1777625125	23.85 C	47.79 %	988.7 hPa	10
1777625065	23.81 C	47.86 %	988.7 hPa	10
1777625005	23.78 C	47.88 %	988.7 hPa	10
1777624945	23.73 C	48.04 %	988.7 hPa	9

*Used Equation Coefficients:

Temperatu: 0, 0.01, 0

Humidity: 0, 0.01, 0

Pressure: 0, 0.1, 800

Battery: 0, 0.01, 0

Satellite: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)