DK1LO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DK1LO. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Speed*	Fix*	Alt*	Sats*	Course*
1779753469	11 km/h	1 bool	1 m	10 count	117.18 deg
1779753404	9 km/h	1 bool	1 m	10 count	135.53 deg
1779753339	9 km/h	1 bool	0 m	10 count	151.06 deg
1779753274	10 km/h	1 bool	4 m	10 count	168 deg
1779753209	10 km/h	1 bool	4 m	10 count	175.06 deg
1779753144	9 km/h	1 bool	5 m	10 count	180.71 deg
1779753079	9 km/h	1 bool	14 m	10 count	180.71 deg
1779753014	10 km/h	1 bool	0 m	10 count	179.3 deg
1779752949	10 km/h	1 bool	5 m	10 count	177.89 deg
1779752884	10 km/h	1 bool	11 m	10 count	177.89 deg
1779752819	9 km/h	1 bool	5 m	9 count	175.06 deg
1779752754	8 km/h	1 bool	1 m	10 count	177.89 deg
1779752689	6 km/h	1 bool	7 m	8 count	182.12 deg
1779752526	2 km/h	1 bool	12 m	9 count	33.88 deg
1779752360	2 km/h	1 bool	0 m	10 count	35.3 deg
1779752180	2 km/h	1 bool	0 m	10 count	117.18 deg
1779752000	2 km/h	1 bool	4 m	10 count	112.94 deg
1779751820	2 km/h	1 bool	0 m	10 count	121.41 deg
1779751640	1 km/h	1 bool	2 m	10 count	360.01 deg
1779751460	0 km/h	1 bool	8 m	10 count	360.01 deg
1779751280	0 km/h	1 bool	12 m	10 count	360.01 deg
1779751100	0 km/h	1 bool	7 m	11 count	360.01 deg
1779750920	0 km/h	1 bool	0 m	11 count	360.01 deg
1779750740	0 km/h	1 bool	0 m	11 count	360.01 deg
1779750560	0 km/h	1 bool	3 m	11 count	360.01 deg

*Used Equation Coefficients:

Speed: 0, 1, 0

Fix: 0, 1, 0

Alt: 0, 1, 0

Sats: 0, 1, 0

Course: 0, 1.4118, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)