OZ0RGM-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OZ0RGM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1784674282	14.1 Volt	200 Pkt	50 Pkt	75 Pcnt	25.48 C
1784673982	14.1 Volt	180 Pkt	50 Pkt	74 Pcnt	25.48 C
1784673982	14.1 Volt	180 Pkt	50 Pkt	74 Pcnt	25.48 C
1784673682	14.1 Volt	190 Pkt	50 Pkt	75 Pcnt	25.48 C
1784673382	14.1 Volt	180 Pkt	50 Pkt	74 Pcnt	25.48 C
1784673082	14.1 Volt	180 Pkt	50 Pkt	73 Pcnt	25.48 C
1784672782	14.1 Volt	190 Pkt	50 Pkt	74 Pcnt	25.48 C
1784672482	14.1 Volt	190 Pkt	60 Pkt	74 Pcnt	25.48 C
1784672182	14.1 Volt	190 Pkt	60 Pkt	73 Pcnt	25.48 C
1784671882	14.1 Volt	190 Pkt	60 Pkt	75 Pcnt	25.48 C
1784671582	14.1 Volt	190 Pkt	50 Pkt	76 Pcnt	25.62 C
1784671282	14.1 Volt	200 Pkt	60 Pkt	77 Pcnt	25.62 C
1784670982	14.1 Volt	200 Pkt	60 Pkt	77 Pcnt	25.62 C
1784670682	14.1 Volt	200 Pkt	60 Pkt	77 Pcnt	25.62 C
1784670383	14.1 Volt	190 Pkt	60 Pkt	74 Pcnt	25.62 C
1784670382	14.1 Volt	190 Pkt	60 Pkt	74 Pcnt	25.62 C
1784670082	14.1 Volt	200 Pkt	60 Pkt	73 Pcnt	25.62 C
1784669782	14.1 Volt	200 Pkt	60 Pkt	72 Pcnt	25.62 C
1784669482	14.1 Volt	210 Pkt	70 Pkt	71 Pcnt	25.62 C
1784669182	14.1 Volt	200 Pkt	70 Pkt	69 Pcnt	25.62 C
1784668882	14.1 Volt	200 Pkt	70 Pkt	68 Pcnt	25.62 C
1784668582	14.1 Volt	210 Pkt	80 Pkt	69 Pcnt	25.62 C
1784668282	14.1 Volt	240 Pkt	90 Pkt	70 Pcnt	25.62 C
1784667982	14.1 Volt	250 Pkt	110 Pkt	71 Pcnt	25.62 C
1784667682	14.1 Volt	270 Pkt	120 Pkt	72 Pcnt	25.76 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.14, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)