9A7KXP-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A7KXP-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Dg10m*
1776703959	14.43 Volt	1000 Pkt	280 Pkt	64 Pcnt	51 Pkt
1776703357	14.5 Volt	990 Pkt	280 Pkt	64 Pcnt	43 Pkt
1776702757	14.5 Volt	1000 Pkt	290 Pkt	64 Pcnt	55 Pkt
1776702156	14.58 Volt	1010 Pkt	280 Pkt	64 Pcnt	44 Pkt
1776701556	14.65 Volt	1010 Pkt	280 Pkt	65 Pcnt	43 Pkt
1776700955	14.65 Volt	1000 Pkt	280 Pkt	65 Pcnt	47 Pkt
1776700355	14.58 Volt	1010 Pkt	290 Pkt	65 Pcnt	50 Pkt
1776699754	14.65 Volt	1010 Pkt	280 Pkt	65 Pcnt	51 Pkt
1776699154	14.65 Volt	990 Pkt	280 Pkt	64 Pcnt	50 Pkt
1776698553	14.65 Volt	960 Pkt	270 Pkt	63 Pcnt	39 Pkt
1776697952	14.58 Volt	980 Pkt	280 Pkt	64 Pcnt	49 Pkt
1776697352	14.58 Volt	970 Pkt	270 Pkt	63 Pcnt	50 Pkt
1776696751	14.58 Volt	960 Pkt	270 Pkt	63 Pcnt	46 Pkt
1776696151	14.58 Volt	950 Pkt	270 Pkt	63 Pcnt	50 Pkt
1776695550	14.65 Volt	980 Pkt	280 Pkt	64 Pcnt	41 Pkt
1776694952	14.65 Volt	1020 Pkt	300 Pkt	66 Pcnt	46 Pkt
1776694349	14.65 Volt	1010 Pkt	300 Pkt	66 Pcnt	42 Pkt
1776693748	14.65 Volt	1030 Pkt	310 Pkt	67 Pcnt	45 Pkt
1776693149	14.58 Volt	1070 Pkt	320 Pkt	68 Pcnt	53 Pkt
1776692548	14.65 Volt	1080 Pkt	310 Pkt	67 Pcnt	53 Pkt
1776691946	14.58 Volt	1090 Pkt	300 Pkt	67 Pcnt	61 Pkt
1776691346	14.65 Volt	1080 Pkt	290 Pkt	67 Pcnt	50 Pkt
1776690745	14.65 Volt	1110 Pkt	290 Pkt	68 Pcnt	47 Pkt
1776690146	14.58 Volt	1090 Pkt	290 Pkt	68 Pcnt	59 Pkt
1776689545	14.65 Volt	1060 Pkt	270 Pkt	66 Pcnt	41 Pkt

*Used Equation Coefficients:

Vin: 0, 0.074, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Dg10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)