EL-DG7JG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-DG7JG. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Value1*	Value2*	Value3*	Value4*
1785225034	0.32 RX Erlang	0.67 TX Erlang	2 RXcount/10m	4 TXcount/10m
1785224434	0.02 RX Erlang	0.95 TX Erlang	2 RXcount/10m	8 TXcount/10m
1785223834	0.21 RX Erlang	0.78 TX Erlang	1 RXcount/10m	4 TXcount/10m
1785223234	0.49 RX Erlang	0.49 TX Erlang	2 RXcount/10m	7 TXcount/10m
1785222634	0.36 RX Erlang	0.38 TX Erlang	6 RXcount/10m	13 TXcount/10m
1785144305	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1785143704	0.02 RX Erlang	0 TX Erlang	19 RXcount/10m	0 TXcount/10m
1785143105	0.13 RX Erlang	0.01 TX Erlang	109 RXcount/10m	1 TXcount/10m
1785142505	0 RX Erlang	0 TX Erlang	2 RXcount/10m	0 TXcount/10m
1785141904	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1785141307	0.01 RX Erlang	0 TX Erlang	16 RXcount/10m	0 TXcount/10m
1785140704	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1785140105	0.04 RX Erlang	0 TX Erlang	36 RXcount/10m	0 TXcount/10m
1785139504	0.02 RX Erlang	0.01 TX Erlang	21 RXcount/10m	1 TXcount/10m
1785138904	0 RX Erlang	0.85 TX Erlang	0 RXcount/10m	13 TXcount/10m
1785138305	0.1 RX Erlang	0.85 TX Erlang	1 RXcount/10m	12 TXcount/10m
1785137705	0.48 RX Erlang	0.48 TX Erlang	3 RXcount/10m	11 TXcount/10m
1785137105	0.49 RX Erlang	0.48 TX Erlang	2 RXcount/10m	7 TXcount/10m
1785136504	0.4 RX Erlang	0.57 TX Erlang	3 RXcount/10m	8 TXcount/10m
1785135904	0.25 RX Erlang	0.73 TX Erlang	3 RXcount/10m	5 TXcount/10m
1785135304	0.02 RX Erlang	0.11 TX Erlang	3 RXcount/10m	5 TXcount/10m
1785134707	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1785134104	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1785057761	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1785057161	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)