HB9HSN-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9HSN-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V.in*	Rx.1h*	Eff.1h*	Temp*
1784793558	12.23 Volt	130 Pkt	51 Pcnt	35 C
1784793258	12.23 Volt	130 Pkt	53 Pcnt	35 C
1784792959	12.23 Volt	130 Pkt	54 Pcnt	35 C
1784792658	12.23 Volt	130 Pkt	54 Pcnt	35 C
1784792358	12.15 Volt	130 Pkt	55 Pcnt	35 C
1784792058	12.23 Volt	130 Pkt	55 Pcnt	35 C
1784791758	12.23 Volt	120 Pkt	53 Pcnt	35 C
1784791458	12.23 Volt	140 Pkt	57 Pcnt	35 C
1784791158	12.23 Volt	130 Pkt	61 Pcnt	35 C
1784790858	12.23 Volt	130 Pkt	61 Pcnt	35 C
1784790558	12.15 Volt	140 Pkt	63 Pcnt	35 C
1784790258	12.23 Volt	140 Pkt	64 Pcnt	35 C
1784789958	12.23 Volt	140 Pkt	67 Pcnt	35 C
1784789659	12.23 Volt	150 Pkt	68 Pcnt	35 C
1784789358	12.23 Volt	140 Pkt	66 Pcnt	35 C
1784789058	12.23 Volt	140 Pkt	65 Pcnt	35 C
1784788758	12.15 Volt	140 Pkt	68 Pcnt	35 C
1784788458	12.23 Volt	140 Pkt	67 Pcnt	35 C
1784788158	12.23 Volt	140 Pkt	68 Pcnt	35 C
1784787858	12.23 Volt	130 Pkt	68 Pcnt	35 C
1784787558	12.15 Volt	130 Pkt	69 Pcnt	35 C
1784787259	12.23 Volt	130 Pkt	68 Pcnt	35 C
1784786959	12.15 Volt	120 Pkt	68 Pcnt	35 C
1784786659	12.23 Volt	130 Pkt	67 Pcnt	35 C
1784786358	12.23 Volt	120 Pkt	63 Pcnt	35 C

*Used Equation Coefficients:

V.in: 0, 0.075, 0

Rx.1h: 0, 10, 0

Dg.1h: 0, 10, 0

Eff.1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)