VK2OB-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2OB-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	BoxTmp*	BoxHum*	dPres*	Counts*
1761736415	23.2 DegC	56 %.	0 mbar	19 CNT
1761735206	23.2 DegC	57 %.	0 mbar	17 CNT
1761734601	23.2 DegC	57 %.	0.3 mbar	16 CNT
1761733997	23.4 DegC	56 %.	0 mbar	15 CNT
1761733392	23.4 DegC	56 %.	0 mbar	14 CNT
1761732787	23.2 DegC	56 %.	0.7 mbar	13 CNT
1761732183	23.4 DegC	56 %.	0 mbar	12 CNT
1761731578	23.2 DegC	57 %.	0 mbar	11 CNT
1761730973	23 DegC	58 %.	0 mbar	10 CNT
1761730369	22.6 DegC	60 %.	0 mbar	9 CNT
1761729764	22 DegC	62 %.	0.4 mbar	8 CNT
1761729160	21.8 DegC	62 %.	0 mbar	7 CNT
1761728555	21.8 DegC	61 %.	0 mbar	6 CNT
1761727950	22 DegC	60 %.	0 mbar	5 CNT
1761727345	21.8 DegC	60 %.	0 mbar	4 CNT
1761726741	22 DegC	59 %.	0 mbar	3 CNT
1761726136	22.8 DegC	56 %.	1 mbar	2 CNT
1761725532	22.6 DegC	56 %.	0 mbar	1 CNT
1761724927	23.2 DegC	54 %.	0 mbar	255 CNT
1761724322	23.6 DegC	52 %.	0 mbar	254 CNT
1761723718	24.6 DegC	50 %.	0 mbar	253 CNT
1761723113	24.8 DegC	51 %.	0 mbar	252 CNT
1761721904	24.6 DegC	52 %.	0 mbar	250 CNT
1761721299	25 DegC	50 %.	0 mbar	249 CNT
1761720694	25.4 DegC	49 %.	0 mbar	248 CNT

*Used Equation Coefficients:

BoxTmp: 0, 0.2, 0

BoxHum: 0, 1, 0

dPres: 0, 0.1, 0

N/A: 0, 1, 0

Counts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)