WC4PEM-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	Rx1h*	Eff1h*
1788572562	20 C	14.25 Volt	300 Pkt	1120 Pkt	70 Pcnt
1788572262	20.5 C	14.25 Volt	300 Pkt	1140 Pkt	70 Pcnt
1788571962	21 C	14.18 Volt	300 Pkt	1140 Pkt	71 Pcnt
1788571662	22 C	14.25 Volt	300 Pkt	1150 Pkt	71 Pcnt
1788571362	23.5 C	14.25 Volt	290 Pkt	1150 Pkt	71 Pcnt
1788571062	24.5 C	14.25 Volt	290 Pkt	1140 Pkt	71 Pcnt
1788570762	23 C	14.25 Volt	290 Pkt	1130 Pkt	71 Pcnt
1788570462	21 C	14.25 Volt	280 Pkt	1110 Pkt	71 Pcnt
1788570162	18.5 C	14.25 Volt	280 Pkt	1130 Pkt	72 Pcnt
1788569862	19 C	14.25 Volt	290 Pkt	1120 Pkt	71 Pcnt
1788569562	19.5 C	14.25 Volt	290 Pkt	1100 Pkt	71 Pcnt
1788569262	20 C	14.25 Volt	290 Pkt	1110 Pkt	70 Pcnt
1788568962	20.5 C	14.18 Volt	290 Pkt	1100 Pkt	70 Pcnt
1788568663	21 C	14.25 Volt	290 Pkt	1100 Pkt	70 Pcnt
1788568662	21 C	14.25 Volt	290 Pkt	1100 Pkt	70 Pcnt
1788568362	22 C	14.18 Volt	290 Pkt	1100 Pkt	69 Pcnt
1788568062	23.5 C	14.18 Volt	290 Pkt	1110 Pkt	70 Pcnt
1788567762	24.5 C	14.25 Volt	300 Pkt	1090 Pkt	69 Pcnt
1788567462	23 C	14.25 Volt	300 Pkt	1090 Pkt	69 Pcnt
1788567162	21 C	14.25 Volt	290 Pkt	1100 Pkt	68 Pcnt
1788566862	18.5 C	14.25 Volt	300 Pkt	1100 Pkt	69 Pcnt
1788566562	18.5 C	14.25 Volt	290 Pkt	1090 Pkt	67 Pcnt
1788566262	19 C	14.25 Volt	290 Pkt	1080 Pkt	68 Pcnt
1788565962	19.5 C	14.18 Volt	280 Pkt	1080 Pkt	67 Pcnt
1788565675	20 C	14.25 Volt	270 Pkt	1050 Pkt	67 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)