EA3ICF-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA3ICF-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Eff*
1776657813	1 Pkt	94 Pcnt
1776657513	0 Pkt	94 Pcnt
1776657213	0 Pkt	94 Pcnt
1776656913	2 Pkt	94 Pcnt
1776656613	2 Pkt	94 Pcnt
1776656313	1 Pkt	93 Pcnt
1776656013	1 Pkt	93 Pcnt
1776655713	1 Pkt	92 Pcnt
1776655413	1 Pkt	92 Pcnt
1776655113	2 Pkt	92 Pcnt
1776654813	2 Pkt	92 Pcnt
1776654513	0 Pkt	90 Pcnt
1776654213	0 Pkt	90 Pcnt
1776653913	1 Pkt	90 Pcnt
1776653613	1 Pkt	90 Pcnt
1776653313	2 Pkt	90 Pcnt
1776653013	2 Pkt	90 Pcnt
1776652713	1 Pkt	87 Pcnt
1776652413	1 Pkt	87 Pcnt
1776652113	1 Pkt	85 Pcnt
1776651813	0 Pkt	85 Pcnt
1776651513	2 Pkt	83 Pcnt
1776651213	1 Pkt	83 Pcnt
1776650913	1 Pkt	75 Pcnt
1776650613	1 Pkt	66 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)