PU5SZN-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PU5SZN-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*	Value5*
1757652663	120	255	77	56	55
1757652062	121	255	77	57	55
1757651461	120	255	77	56	55
1757650860	120	255	77	56	55
1757650259	121	255	78	57	55
1757649658	121	255	77	56	55
1757649057	120	255	77	57	55
1757648456	121	255	77	56	55
1757647855	120	255	76	56	54
1757647252	120	255	77	56	55
1757646651	121	255	77	56	54
1757646050	121	255	76	56	54
1757645449	121	255	77	56	54
1757644848	121	255	76	55	53
1757644247	120	255	76	55	54
1757643646	121	255	76	55	53
1757643041	120	255	76	55	53
1757642440	121	255	76	55	54
1757641839	120	255	76	55	53
1757641238	120	255	75	54	53
1757640637	121	255	75	54	52
1757640036	121	255	75	54	53
1757639435	107	255	75	54	53
1757638834	106	255	75	54	52
1757638222	106	255	74	54	52

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)