E22KKC-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22KKC-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1761563137	77 Pkt	0 Pkt	0 Pkt	-41 dBm	0.08 V
1761561310	65 Pkt	0 Pkt	2 Pkt	-41 dBm	0.08 V
1761559484	80 Pkt	0 Pkt	2 Pkt	-41 dBm	0.08 V
1761557657	75 Pkt	0 Pkt	1 Pkt	-41 dBm	0.08 V
1761555831	70 Pkt	0 Pkt	0 Pkt	-41 dBm	0.08 V
1761554004	67 Pkt	0 Pkt	0 Pkt	-41 dBm	0.08 V
1761552178	77 Pkt	0 Pkt	0 Pkt	-41 dBm	0.08 V
1761550351	58 Pkt	0 Pkt	0 Pkt	-42 dBm	0.08 V
1761548525	67 Pkt	1 Pkt	0 Pkt	-41 dBm	0.08 V
1761546698	60 Pkt	0 Pkt	0 Pkt	-41 dBm	0.08 V
1761544872	39 Pkt	0 Pkt	0 Pkt	-42 dBm	0.08 V
1761543046	34 Pkt	0 Pkt	0 Pkt	-41 dBm	0.08 V
1761541220	50 Pkt	0 Pkt	0 Pkt	-42 dBm	0.08 V
1761539395	54 Pkt	0 Pkt	0 Pkt	-42 dBm	0.08 V
1761537568	50 Pkt	0 Pkt	0 Pkt	-39 dBm	0.08 V
1761535743	60 Pkt	0 Pkt	0 Pkt	-40 dBm	0.08 V
1761533916	70 Pkt	0 Pkt	1 Pkt	-39 dBm	0.08 V
1761532090	55 Pkt	0 Pkt	2 Pkt	-40 dBm	0.08 V
1761530263	62 Pkt	0 Pkt	2 Pkt	-40 dBm	0.08 V
1761528437	0 Pkt	0 Pkt	0 Pkt	-40 dBm	0.08 V
1761527624	69 Pkt	0 Pkt	0 Pkt	-42 dBm	0.08 V
1761525797	91 Pkt	0 Pkt	0 Pkt	-41 dBm	0.08 V
1761523970	1 Pkt	0 Pkt	0 Pkt	-41 dBm	0.08 V
1761523486	80 Pkt	0 Pkt	0 Pkt	-40 dBm	0.08 V
1761521658	82 Pkt	0 Pkt	1 Pkt	-40 dBm	0.08 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)