ER-PY3KZ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ER-PY3KZ. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1780885526	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1780884934	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1780884326	0 RX Erlang	0.51 TX Erlang	0 RXcount/10m	20 TXcount/10m
1780883726	0 RX Erlang	0.63 TX Erlang	0 RXcount/10m	26 TXcount/10m
1780883126	0 RX Erlang	0.81 TX Erlang	0 RXcount/10m	30 TXcount/10m
1780882526	0 RX Erlang	0.86 TX Erlang	0 RXcount/10m	29 TXcount/10m
1780881926	0 RX Erlang	0.8 TX Erlang	0 RXcount/10m	30 TXcount/10m
1780881326	0 RX Erlang	0.7 TX Erlang	0 RXcount/10m	32 TXcount/10m
1780880726	0 RX Erlang	0.8 TX Erlang	0 RXcount/10m	23 TXcount/10m
1780880126	0 RX Erlang	0.78 TX Erlang	0 RXcount/10m	28 TXcount/10m
1780879526	0 RX Erlang	0.61 TX Erlang	0 RXcount/10m	30 TXcount/10m
1780878926	0 RX Erlang	0.59 TX Erlang	0 RXcount/10m	23 TXcount/10m
1780878326	0 RX Erlang	0.16 TX Erlang	0 RXcount/10m	11 TXcount/10m
1780877732	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	2 TXcount/10m
1780877126	0 RX Erlang	0.37 TX Erlang	1 RXcount/10m	14 TXcount/10m
1780876526	0 RX Erlang	0.46 TX Erlang	0 RXcount/10m	14 TXcount/10m
1780875926	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1780875326	0 RX Erlang	0.21 TX Erlang	1 RXcount/10m	12 TXcount/10m
1780874726	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	5 TXcount/10m
1780874128	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1780873526	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1780872926	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	10 TXcount/10m
1780872326	0 RX Erlang	0.2 TX Erlang	0 RXcount/10m	8 TXcount/10m
1780871726	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1780871126	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)