VK2HFG-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2HFG-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CoreTemp*	Fan*	Value3*	Value4*	Value5*
1761617543	38 Deg.C	0 State	0	0	0
1761616341	39 Deg.C	0 State	0	0	0
1761615961	39 Deg.C	0 State	0	0	0
1761615789	37 Deg.C	0 State	0	0	0
1761615608	38 Deg.C	0 State	0	0	0
1761615556	39 Deg.C	0 State	0	0	0
1761615375	38 Deg.C	0 State	0	0	0
1761615143	38 Deg.C	0 State	0	0	0
1761615060	39 Deg.C	0 State	0	0	0
1761614520	37 Deg.C	0 State	0	0	0
1761614340	38 Deg.C	0 State	0	0	0
1761614160	37 Deg.C	0 State	0	0	0
1761613980	38 Deg.C	0 State	0	0	0
1761613783	37 Deg.C	0 State	0	0	0
1761613532	38 Deg.C	0 State	0	0	0
1761613167	37 Deg.C	0 State	0	0	0
1761612959	37 Deg.C	0 State	0	0	0
1761612778	37 Deg.C	0 State	0	0	0
1761612636	38 Deg.C	0 State	0	0	0
1761612552	37 Deg.C	0 State	0	0	0
1761612499	37 Deg.C	0 State	0	0	0
1761612319	37 Deg.C	0 State	0	0	0
1761612266	37 Deg.C	0 State	0	0	0
1761612084	37 Deg.C	0 State	0	0	0
1761612032	37 Deg.C	0 State	0	0	0

*Used Equation Coefficients:

CoreTemp: 0, 1, 0

Fan: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)