IR2UGB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2UGB. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff1h*
1765599616	55 Pkt	350 Pkt	2 Pkt	3.07 Pcnt	83 Pcnt
1765599316	57 Pkt	370 Pkt	3 Pkt	3.07 Pcnt	84 Pcnt
1765599030	55 Pkt	370 Pkt	3 Pkt	3.07 Pcnt	85 Pcnt
1765598715	58 Pkt	380 Pkt	2 Pkt	3.07 Pcnt	85 Pcnt
1765598415	62 Pkt	390 Pkt	2 Pkt	3.07 Pcnt	86 Pcnt
1765598115	52 Pkt	380 Pkt	2 Pkt	3.07 Pcnt	86 Pcnt
1765597815	48 Pkt	380 Pkt	2 Pkt	3.07 Pcnt	86 Pcnt
1765597514	58 Pkt	390 Pkt	3 Pkt	3.07 Pcnt	87 Pcnt
1765597214	67 Pkt	390 Pkt	3 Pkt	3.07 Pcnt	86 Pcnt
1765596914	61 Pkt	380 Pkt	2 Pkt	3.07 Pcnt	87 Pcnt
1765596613	67 Pkt	390 Pkt	2 Pkt	3.07 Pcnt	88 Pcnt
1765596313	74 Pkt	370 Pkt	2 Pkt	3.07 Pcnt	87 Pcnt
1765596013	77 Pkt	370 Pkt	2 Pkt	3.07 Pcnt	87 Pcnt
1765595712	66 Pkt	360 Pkt	1 Pkt	3.07 Pcnt	87 Pcnt
1765595412	73 Pkt	360 Pkt	2 Pkt	3.07 Pcnt	86 Pcnt
1765595112	52 Pkt	340 Pkt	2 Pkt	3.07 Pcnt	85 Pcnt
1765594812	51 Pkt	350 Pkt	2 Pkt	3.07 Pcnt	84 Pcnt
1765594511	63 Pkt	360 Pkt	2 Pkt	3.07 Pcnt	83 Pcnt
1765594211	58 Pkt	360 Pkt	1 Pkt	3.07 Pcnt	81 Pcnt
1765593911	49 Pkt	350 Pkt	1 Pkt	3.07 Pcnt	80 Pcnt
1765593611	62 Pkt	360 Pkt	3 Pkt	3.07 Pcnt	81 Pcnt
1765593310	57 Pkt	350 Pkt	3 Pkt	3.07 Pcnt	79 Pcnt
1765593010	53 Pkt	360 Pkt	1 Pkt	3.07 Pcnt	79 Pcnt
1765592710	58 Pkt	360 Pkt	1 Pkt	3.07 Pcnt	78 Pcnt
1765592409	64 Pkt	360 Pkt	2 Pkt	3.07 Pcnt	78 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)