TA1DF-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1DF-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1765571532	0.15 Load	44.3 DegC	1311 Mb	264 Pkt	231 Pkt
1765571232	0.14 Load	44.79 DegC	1319 Mb	251 Pkt	207 Pkt
1765570932	0.2 Load	43.33 DegC	1320 Mb	476 Pkt	211 Pkt
1765570633	0.13 Load	44.3 DegC	1318 Mb	244 Pkt	219 Pkt
1765570332	0.16 Load	44.3 DegC	1320 Mb	229 Pkt	188 Pkt
1765570032	0.19 Load	44.79 DegC	1322 Mb	232 Pkt	202 Pkt
1765569732	0.19 Load	44.79 DegC	1312 Mb	215 Pkt	204 Pkt
1765569432	0.15 Load	44.79 DegC	1322 Mb	288 Pkt	231 Pkt
1765569133	0.15 Load	44.79 DegC	1313 Mb	541 Pkt	209 Pkt
1765568832	0.16 Load	43.82 DegC	1312 Mb	188 Pkt	182 Pkt
1765568532	0.21 Load	45.28 DegC	1313 Mb	281 Pkt	208 Pkt
1765568232	0.23 Load	43.82 DegC	1320 Mb	204 Pkt	193 Pkt
1765567932	0.16 Load	45.28 DegC	1322 Mb	201 Pkt	169 Pkt
1765567632	0.18 Load	44.79 DegC	1322 Mb	317 Pkt	239 Pkt
1765567332	0.17 Load	44.79 DegC	1317 Mb	529 Pkt	209 Pkt
1765567032	0.22 Load	44.3 DegC	1325 Mb	266 Pkt	183 Pkt
1765566732	0.21 Load	44.3 DegC	1316 Mb	301 Pkt	213 Pkt
1765566432	0.11 Load	44.3 DegC	1315 Mb	250 Pkt	161 Pkt
1765566132	0.09 Load	44.3 DegC	1312 Mb	253 Pkt	198 Pkt
1765565832	0.12 Load	45.28 DegC	1322 Mb	287 Pkt	211 Pkt
1765565533	0.17 Load	45.76 DegC	1318 Mb	546 Pkt	248 Pkt
1765565232	0.18 Load	44.79 DegC	1325 Mb	224 Pkt	215 Pkt
1765564932	0.26 Load	44.79 DegC	1325 Mb	264 Pkt	201 Pkt
1765564632	0.2 Load	44.79 DegC	1319 Mb	238 Pkt	215 Pkt
1765564333	0.17 Load	44.3 DegC	1324 Mb	221 Pkt	214 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)