XE1BRX-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE1BRX-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1788595199	13.28 Volt	40 Pkt	90 Pcnt	25.85 C
1788594899	13.28 Volt	40 Pkt	91 Pcnt	25.85 C
1788594605	13.28 Volt	40 Pkt	86 Pcnt	25.85 C
1788594299	13.28 Volt	40 Pkt	82 Pcnt	25.85 C
1788593999	13.28 Volt	30 Pkt	82 Pcnt	25.85 C
1788593699	13.28 Volt	30 Pkt	83 Pcnt	25.85 C
1788593399	13.28 Volt	40 Pkt	86 Pcnt	25.85 C
1788593099	13.28 Volt	60 Pkt	88 Pcnt	25.85 C
1788592819	13.28 Volt	60 Pkt	85 Pcnt	25.85 C
1788592499	13.28 Volt	50 Pkt	86 Pcnt	25.85 C
1788592199	13.28 Volt	50 Pkt	86 Pcnt	25.85 C
1788591899	13.28 Volt	60 Pkt	88 Pcnt	25.85 C
1788591599	13.28 Volt	60 Pkt	88 Pcnt	25.85 C
1788591299	13.28 Volt	50 Pkt	87 Pcnt	26.35 C
1788590999	13.28 Volt	50 Pkt	90 Pcnt	25.85 C
1788590699	13.28 Volt	50 Pkt	92 Pcnt	25.85 C
1788590399	13.28 Volt	50 Pkt	93 Pcnt	25.85 C
1788590099	13.28 Volt	50 Pkt	89 Pcnt	25.85 C
1788589799	13.28 Volt	70 Pkt	92 Pcnt	25.85 C
1788589499	13.28 Volt	50 Pkt	93 Pcnt	26.35 C
1788589199	13.28 Volt	50 Pkt	93 Pcnt	26.35 C
1788588899	13.28 Volt	50 Pkt	93 Pcnt	26.35 C
1788588599	13.28 Volt	50 Pkt	93 Pcnt	26.35 C
1788588299	13.28 Volt	50 Pkt	91 Pcnt	26.35 C
1788587999	13.28 Volt	50 Pkt	91 Pcnt	26.35 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0.0005247, 0.3137172, -47.6223

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)