WI9FUR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WI9FUR-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1753505369	0.08 Rx Erlang	0 Tx Erlang	74 count/10m	1 count/10m	3 count/10m
1753504169	0.06 Rx Erlang	0.01 Tx Erlang	64 count/10m	1 count/10m	3 count/10m
1753502969	0.06 Rx Erlang	0 Tx Erlang	57 count/10m	0 count/10m	3 count/10m
1753501769	0.07 Rx Erlang	0 Tx Erlang	68 count/10m	1 count/10m	2 count/10m
1753451239	0.11 Rx Erlang	0.01 Tx Erlang	114 count/10m	6 count/10m	10 count/10m
1753448839	0.09 Rx Erlang	0 Tx Erlang	84 count/10m	1 count/10m	3 count/10m
1753447639	0.09 Rx Erlang	0.01 Tx Erlang	91 count/10m	1 count/10m	7 count/10m
1753446439	0.11 Rx Erlang	0.01 Tx Erlang	120 count/10m	1 count/10m	11 count/10m
1753445239	0.08 Rx Erlang	0 Tx Erlang	82 count/10m	0 count/10m	4 count/10m
1753442839	0.07 Rx Erlang	0 Tx Erlang	78 count/10m	1 count/10m	3 count/10m
1753441639	0.07 Rx Erlang	0 Tx Erlang	67 count/10m	1 count/10m	3 count/10m
1753439239	0.08 Rx Erlang	0.01 Tx Erlang	75 count/10m	6 count/10m	4 count/10m
1753438039	0.07 Rx Erlang	0 Tx Erlang	68 count/10m	1 count/10m	2 count/10m
1753435639	0.06 Rx Erlang	0 Tx Erlang	58 count/10m	0 count/10m	3 count/10m
1753434440	0.06 Rx Erlang	0 Tx Erlang	61 count/10m	0 count/10m	3 count/10m
1753433240	0.07 Rx Erlang	0 Tx Erlang	67 count/10m	1 count/10m	2 count/10m
1753430839	0.07 Rx Erlang	0 Tx Erlang	65 count/10m	1 count/10m	3 count/10m
1753427240	0.06 Rx Erlang	0 Tx Erlang	57 count/10m	1 count/10m	3 count/10m
1753426039	0.06 Rx Erlang	0 Tx Erlang	61 count/10m	1 count/10m	2 count/10m
1753424839	0.07 Rx Erlang	0 Tx Erlang	68 count/10m	1 count/10m	3 count/10m
1753423639	0.08 Rx Erlang	0 Tx Erlang	64 count/10m	0 count/10m	2 count/10m
1753422440	0.07 Rx Erlang	0 Tx Erlang	60 count/10m	0 count/10m	2 count/10m
1753421239	0.08 Rx Erlang	0 Tx Erlang	65 count/10m	0 count/10m	2 count/10m
1753420039	0.06 Rx Erlang	0 Tx Erlang	59 count/10m	1 count/10m	2 count/10m
1753417639	0.05 Rx Erlang	0 Tx Erlang	52 count/10m	0 count/10m	2 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)