DB0SWR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0SWR-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Temp*	RPkt/h*	DPkt/h*
1780893641	12.83 Volt	30 DegC	790 Stk.	27169 Stk.
1780893341	12.83 Volt	30 DegC	780 Stk.	25667 Stk.
1780893041	12.83 Volt	30 DegC	760 Stk.	25097 Stk.
1780892741	12.83 Volt	29.5 DegC	760 Stk.	24409 Stk.
1780892441	12.83 Volt	30 DegC	750 Stk.	24101 Stk.
1780892141	12.83 Volt	29.5 DegC	750 Stk.	24074 Stk.
1780891842	12.83 Volt	29.5 DegC	740 Stk.	24699 Stk.
1780891541	12.83 Volt	29.5 DegC	730 Stk.	24119 Stk.
1780891242	12.83 Volt	29.5 DegC	720 Stk.	24551 Stk.
1780890942	12.83 Volt	29 DegC	710 Stk.	24089 Stk.
1780890642	12.83 Volt	29 DegC	680 Stk.	25253 Stk.
1780890341	12.83 Volt	29 DegC	700 Stk.	25428 Stk.
1780890042	12.83 Volt	29 DegC	680 Stk.	25399 Stk.
1780889741	12.83 Volt	29 DegC	690 Stk.	25652 Stk.
1780889442	12.83 Volt	28.5 DegC	670 Stk.	25667 Stk.
1780889142	12.83 Volt	28.5 DegC	680 Stk.	25588 Stk.
1780888842	12.83 Volt	28.5 DegC	660 Stk.	25303 Stk.
1780888542	12.83 Volt	28.5 DegC	660 Stk.	23939 Stk.
1780888242	12.83 Volt	28.5 DegC	650 Stk.	23969 Stk.
1780887942	12.83 Volt	28.5 DegC	660 Stk.	23181 Stk.
1780887642	12.83 Volt	28.5 DegC	650 Stk.	23853 Stk.
1780887342	12.83 Volt	28.5 DegC	660 Stk.	23723 Stk.
1780887042	12.83 Volt	28.5 DegC	650 Stk.	23744 Stk.
1780886749	12.83 Volt	28.5 DegC	650 Stk.	23323 Stk.
1780886442	12.83 Volt	28.5 DegC	660 Stk.	23680 Stk.

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Temp: 0, 0.5, -64

RPkt/h: 0, 10, 0

DPkt/h: 0, 1, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)