E23QD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E23QD. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1788586118	14.22 Volt	0 Pkt	0 Pkt	100 Pcnt
1788585818	14.22 Volt	0 Pkt	0 Pkt	100 Pcnt
1788585518	14.22 Volt	0 Pkt	0 Pkt	100 Pcnt
1788585218	14.22 Volt	0 Pkt	0 Pkt	100 Pcnt
1788584917	14.22 Volt	0 Pkt	0 Pkt	100 Pcnt
1788584617	14.3 Volt	0 Pkt	0 Pkt	100 Pcnt
1788584317	14.3 Volt	0 Pkt	0 Pkt	100 Pcnt
1788584016	14.3 Volt	10 Pkt	10 Pkt	100 Pcnt
1788583716	14.3 Volt	10 Pkt	10 Pkt	100 Pcnt
1788583416	14.3 Volt	10 Pkt	10 Pkt	100 Pcnt
1788583116	14.3 Volt	10 Pkt	10 Pkt	100 Pcnt
1788582815	14.3 Volt	20 Pkt	20 Pkt	100 Pcnt
1788582515	14.3 Volt	20 Pkt	20 Pkt	100 Pcnt
1788582215	14.3 Volt	20 Pkt	20 Pkt	100 Pcnt
1788581914	14.3 Volt	20 Pkt	20 Pkt	100 Pcnt
1788581614	14.3 Volt	20 Pkt	20 Pkt	100 Pcnt
1788581314	14.3 Volt	20 Pkt	20 Pkt	100 Pcnt
1788581014	14.3 Volt	20 Pkt	20 Pkt	100 Pcnt
1788580713	14.3 Volt	20 Pkt	20 Pkt	100 Pcnt
1788580413	14.3 Volt	20 Pkt	20 Pkt	100 Pcnt
1788580113	14.3 Volt	20 Pkt	20 Pkt	100 Pcnt
1788579812	14.22 Volt	20 Pkt	20 Pkt	100 Pcnt
1788579512	14.3 Volt	20 Pkt	20 Pkt	100 Pcnt
1788579212	14.3 Volt	20 Pkt	20 Pkt	100 Pcnt
1788578912	14.3 Volt	30 Pkt	30 Pkt	100 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)